EPEVER EPIPDB-COM-10 Dual Battery PWM Charge Controller

Chitarisiko

YAMBIRO

Usaise controller mune hunyoro, munyu pfapfaidzo, ngura, girizi, inopisa, inoputika, inounganidza huruva, kana dzimwe nzvimbo dzakakomba.

(Cherechedza: connect the components as the 1-6)

Icon	Function
	Batanidza nebhatiri #1.
	Batanidza nebhatiri #2.
	Batanidza nePV array.
Remote temp. sensor (Optional)	Remotely measure the battery temperature to regulate the battery voltage.
Local temp. sensor	Measure ambient temperature.
Zvebhatiri 1	Indicate battery #1 charging status and error.
Zvebhatiri 2	Indicate battery #2 charging status and error.
Kubatana kwemamita kure	Batanidza nemamita ari kure.

Cherechedza: No RTS; the controller measures ambient temperature by the local temp. sensor. While the controller will obtain data from the RTS automatically after the RTS is connected.

EPIPDB-COM series are common-negative controllers. Negative terminals of the PV array and batteries can be grounded simultaneously, or any negative terminal is grounded. According to the practical application, the negative terminals of the PV array and batteries can also be ungrounded.

However, the grounding terminal on the controller shell must be grounded.

It can shield electromagnetic interference and avoid electric shock to the human body.

KUCHENJERA

Kushandisa yakajairwa-negative controller kune yakajairika-negative masisitimu, senge RV system, inokurudzirwa. Iyo controller inogona kukuvadzwa kana yakajairwa-positive controller yakashandiswa uye iyo yakanaka electrode yakavakirwa pane yakajairika-negative system.

Mode Setting

bhatiri mhando	mode
charging priority
charging frequence

Three LEDs flash, and each LED indicates different specifications. Choose the LED according to the following information, and then press the button for 5 seconds until the number flashes. And then, choose one number you need and leave it, and the number will be saved.

1. 1st LED is for the battery type setting.
   

   1st LED	Bhatiri mhando
   1	Yakavharwa bhatiri
   2	Gel bhatiri
   3	Mafashama bhatiri

2. 2nd LED is for the charging priority setting. Set the percentage for battery #1, and the controller will automatically calculate the rest percentage yebhatiri #2.
   

   2nd LED	Bhatiri #1 charging percentage	Battery # 2 Kubhadharisa percentage
   0	0%	100%
   1	10%	90%
   2	20%	80%
   3	30%	70%
   4	40%	60%
   5	50%	50%
   6	60%	40%
   7	70%	30%
   8	80%	20%
   9	90% (pre-set)	10%

   Cherechedza: During the normal charging process, the controller charges the battery per the set percentage. Kana bhatiri rimwe razara chaji (senge bhatiri #1), yakawanda kuchaja ikozvino ichaendeswa kune rimwe bhatiri (bhatiri #2). Mudzori anodzokera otomatiki kuchikamu chesettingtage apo bhatiri #1 rakaderera voltage.
   When the controller detects only one battery, all the charging current will go to this battery automatically.
3. 3rd LED is for the charging frequency setting.
   

   3rd LED	PWM yekuchaja frequency
   0	25Hz (pre-set)
   1	50Hz
   2	100Hz

Kugadzirisa matambudziko

Aihwa.	Status ye LED	Kugadzirisa matambudziko
1	LED inopenya	Short circuit. Please check whether the PV and battery connection is correct.
2	LED slowly flashing	Zvakakwana
3	Akatungamirira ON	Mukuchajisa
4	LED frequent flashing	Hapana kuchaja kana chero bhatiri rinoonekwa.
5	Akatungamirira kure	Hapana bhatiri kana system inopfuura voltage.

Technical Information

Model	EPIPDB-COM-10	EPIPDB-COM-20
Zita remazita voltage	12 / 24VDC Auto
Rated charge current	10A	20A
Bhatiri Type	Seled; Gel; Mafashamo
Equalize kuchaja voltage	Chisimbiso: 14.6V; Gel: Kwete; Mafashamo: 14.8V
Boost kuchaja voltage	Chisimbiso: 14.4V; Gel: 14.2V; Mafashamo: 14.6V
Float kuchaja voltage	Yakanamwa/Geri/Mafashamo: 13.8V
Maximum solar voltage	30V(12V System); 55V(24V System)
Bhatiri voltage range	8 ~ 15V
Wedzera nguva	120 kwemaminitsi
Kuzvidyira	4mA usiku; 10mA pakuchaja
Kukurukurirana port	8-PIN RJ-45
Temp. muripo	-5mV / ℃ / 2V
Zviteshi	4mm2
Kupisa kwenzvimbo	-35 ℃ ~ +55 ℃
Net uremu	250g

Note: The above parameters are measured in the condition of a 12V system. Please double the values in the 24V system.

Mechanical Drawing

Version Number: V3.1

Mutengi Support

HUIZHOU EPEVER TECHNOLOGY CO., LTD.
Tel: +86-752-3889706
E-mail: info@epever.com
Websaiti: www.epever.com

Zvinyorwa / Zvishandiso

EPEVER EPIPDB-COM-10 Dual Battery PWM Charge Controller [pdf] User Manual EPIPDB-COM-10, EPIPDB-COM-20, EPIPDB-COM-10 Dual Battery PWM Charge Controller, EPIPDB-COM-10, Dual Battery PWM Charge Controller, Battery PWM Charge Controller, PWM Charge Controller, Charge Controller

References

• User Manual