HAKKO 652 Feed Controller

Product Information

Chigadzirwa chacho chinoshandiswa zvakasiyana-siyana uye chepamusoro-chigadzirwa chakagadzirirwa kuzadzisa zvinodiwa nevashandisi vakasiyana-siyana. Yakavakwa nehunyanzvi hwepamusoro uye maficha anosimudzira kushanda kwayo uye kushandiswa kwayo. Chigadzirwa chacho chinozivikanwa nekusimba kwayo uye kuvimbika, zvichiita kuti ive yakakodzera kune zvese zvemunhu uye zvehunyanzvi kushandiswa.

Mibvunzo Inowanzo bvunzwa

• Q: Ndinovandudza sei software yemudziyo?
  • A: Kuti uvandudze software yemudziyo, enda kune zvigadziriso menyu uye sarudza iyo "Software Update" sarudzo. Tevedza mirairo iri pa-screen kuti utarise zviripo uye uzviise.
• Q: Ndinogona kuwedzera simba rekuchengetedza mudziyo?
  • A: Ehe, unogona kuwedzera dura rekuchengetera mudziyo nekuisa memori kadhi rinoenderana mune yakapihwa memori kadhi slot. Tarisa kubhuku remushandisi remhando dzememory card dzinotsigirwa uye mirairo yekuisa.
• Q: Ndinogadzirisa sei mudziyo kune zvigadziriso zvefekitari?
  • A: Kuti ugadzirise zvakare mudziyo kune zvigadziriso zvefekitari, enda kune zvigadziriso menyu uye sarudza iyo "Backup & Reset" sarudzo. Sarudza iyo "Factory Data Reset" sarudzo uye uteedzere pa-screen mirairo kuti utange kuita reset. Ziva kuti izvi zvinodzima data rese pane mudziyo, saka ita shuwa yekudzosera chero yakakosha files zvisati zvaitika.
• Q: Bhatiri rinogara kwenguva yakareba sei pakuchaji yakazara?
  • A: Hupenyu hwebhatiri remuchina hunogona kusiyana zvichienderana nekushandiswa uye marongero. Mumamiriro ezvinhu akajairika, bhatiri rinogona kugara kusvika [nguva yehupenyu hwebhatiri] pakuchajiwa kwakazara. Nekudaro, kushandisa maapplication akasimba-simba kana kushandisa maficha akaita seGPS kunogona kuderedza hupenyu hwebhatiri.
• Q: Mudziyo wacho haupindi mvura here?
  • A: Hongu, chigadziri chacho chinodzivirira mvura kusvika kune imwe nhanho. Yakagadzirirwa kutsungirira splashes kana kunyudzwa kwenguva pfupi mumvura. Nekudaro, hazvikurudzirwe kunyudza mudziyo zvachose kana kuisa pachena kumvura kwenguva yakareba.

Ndatenda

Ndatenda nekutengaasing the HAKKO 652 Feed Controller.

Iyi unit ndeye Feed Controller iyo inoshandiswa pamwe chete neHAKKO 651 Feeder Head kuderedza basa uye kugadzirisa maitiro ekutengesa.
Ndokumbira uverenge bhuku rino usati washandisa HAKKO 652, uye chengeta bhuku rekushandisa munzvimbo yakachengeteka inosvikika zviri nyore kuitira ramangwana.

Packing List

• Main unit
• Z axis air chubhu (1.5m, 4.91)
• 1/0 tambo / 24 musimboti (2m, 6.61)
• chikamu nhamba: C1114

Zvinotsanangurwa

• Ratings: 20W 50/60Hz
• Air pressure: 4 – 5kgf/cm'.
• Solder dhayamita (mm): 05. 06. 08. 10 12 1.6
  • (inch): 0.0197.0.024.0.031.0.039.0.047.0.063
• Soldering mamiriro: 100 yega yega CW/PW
• Soldering nzira: Point work (PW)
  • Basa rinoenderera mberi (CW)
• Primary solder feed amount: 0.0 - 20.0mm
• Secondary solder feed amount: 00.0 - 99.9mm
  • (PW chete)
• Secondary solder feed speed: 00.0 - 99.9mm/s
• Preheat nguva: 0.0 - 9.9s
• Pisa nguva: 0.0 - 9.9s
• Primary/secondary solder return amount: 0 - 9mm
• Kukurumidza kudzoka: 0 -99mm/s
• Kurema 2.6kg (5.7lbs.)

Kuchengeteka uye Zvimwe Zvokuchengetedza

Sezvo kubatwa zvisina kunaka kuchigona kukonzera moto kana kukuvara, iva nechokwadi chekutevedzera zvinotevera.

KUCHENJERA

• Ita shuwa kuti wiring yakarurama usati wabatidza simba.
• Usadzvanya makiyi nezvinhu zvinopinza sezvinyoreso zvebhora kana simbi.
• Dzivisa kukanganisa kwakasimba kune chikwata.
• Shandisa zvikamu zveHAKKO chete.
• Usagadzirise kana disassemble unit.
• Usabvumira iyo unit kuti inyorove.

Mounting nzvimbo

• Dzivisa nzvimbo dzine gasi rinoparadza, huruva, kana mafuta.
• Dzivisa nzvimbo dziri padyo nenzvimbo dzeruzha rwemagetsi kana pasi pemhedzisiro yemagetsi emagetsi.
• Dzivisa nzvimbo uko kuzunguzika kwakasimba kana kuvhunduka kunogona kukanganisa chikamu.
• Dzivisa chiedza chezuva chakananga.

Nyora protect

Ichi chikamu chine chinyorwa chekudzivirira kuchengetedza netsaona kurasikirwa nedata. Paunenge uchivandudza chirongwa chesoftware, unofanira kutanga wadzima chimiro ichi uchishandisa zvinotevera maitiro.

1. Dzima simba kuburikidza nemagetsi.
2. Dzorera simba uye wobva wadzvanya [MODE] kiyi, uchiibata pasi kusvika menyu yaoneka.

Iyi nzira ichadzima chinyorwa chekudzivirira kusvika simba radzimwa zvakare. Mushure mekugadzirisa chirongwa chesoftware, dzima simba uye wobva wabatidza zvakare kuti ugonese kunyora kuchengetedza chimiro.

Pfungwa yebasa (PW) uye inoenderera basa (CW)

PW inomirira "point work", uye point inoreva soldering. CW inomirira "basa rinoenderera" uye inoreva mutsara wekutengesa kana kuyerera. Mukushanda kweCW, iyo unit inofambiswa munzira yeX uye Y ine Z2 axis yakadzikiswa uku yechipiri solder feed ichienderera nekumhanya kwakaiswa neS2.

Solder unclog chimiro

Iyi unit yakashongedzerwa nechinhu chinobvisa otomatiki kuvhara solder. Kana solder blockage yaonekwa, solder inobviswa kusvika pakatanga solder feed uyezve kudya kunotangazve. Iyi nzira inodzokororwa kakawanda sezvinodiwa kudzima blockage kana kusvika nhamba yakatarwa yenguva yasvika.

Air tubing

• Kana uchibatanidza kune HAKKO robhoti (HAKKO 965/966), hapana chikonzero chekubatanidza chubhu yemhepo kune jack pane reshure remutongi wekudya.
• Kana uchibatanidza kune robhoti yakagadzirwa neimwe kambani, musoro weZ.2 cylinder uye mhepo yekuchenesa tube inodiwa.

Mazita eZvikamu

Kubatana nemamwe ma Units

*Ona Interface Specification (P14) ye 1/O Yekubatanidza & nguva Chati.

Operation

Display

Ikozvino maitiro inoratidzwa mukona yepamusoro yekurudyi yekuratidzira. Nyeredzi (*) inoratidzwa kuruboshwe rwechinhu chazvino. Shandisa iyo kiyi yekufambisa asterisk uye sarudza chinhu chaunoda.

Chiratidziro lamps

• SIMBA: Simba lamp inovhenekerwa kana simba rakabatidzwa.
• READY: The ready lamp inovhenekerwa kana gadziriro dzekutanga dzapera.
• ALARM: Aramu lamp inovhenekerwa kana kukanganisa kwaitika.

Mabasa akakosha

• Paunenge uchichinja marongero, kusvika wadzvanya <WR/START> kuti usimbise kupinza, unogona kushandisa <CAN> kudzima shanduko uye kudzoreredza kukosha kwekare.

Tanga

• Kana zvese zvinongedzo zvagadzirwa, dzvanya [SIMBA] switch. Nhamba yevhezheni icharatidzwa uye iyo unit ichapinda AUTO modhi.

Mode sarudzo

Sarudza nzira yakakodzera yebasa racho.

• Kuita soldering maererano nepurogiramu:
  • Sarudza AUTO mode.
• Kuisa mamiriro ekutengesa:
  1. Dzima kudzivirira kunyora.
  2. Sarudza PROGRAM mode.
• Kutarisa kushanda kwe soldering:
  • Sarudza MANUAL mode.
• To view data rakachengetedzwa:
  • Sarudza PROGRAM mode kana MANUAL mode.
• Kuchinja marongero ekutanga:
  1. Dzima kudzivirira kunyora.
  2. Sarudza PARAMETER modhi.
• Kudyisa solder kana kusimudza/kudzikisa silinda:
  • Sarudza AUTO mode.

AUTO mode

Dzora soldering nepurogiramu

Kuti uchinje kune AUTO modhi, sunda iyo kiyi kakawanda kusvika izwi rekuti "AUTO" raonekwa kumusoro kurudyi kwechiratidziro. Nonnally iyo unit ichapinda AUTO modhi otomatiki kana simba rabatidzwa.

PROGRAM mode

Seta soldering mamiriro, view data rakachengetwa

Kuti uchinje kuPROGRAM modhi, tinya iyo kiyi kakawanda kusvika izwi rekuti "PROGRAM" rabuda kumusoro kurudyi kwechiratidziro.

Kuti uchinje iyo data, zvinodikanwa kudzima chinyorwa chekudzivirira.
Mune iyi menyu, kana usingakwanise kufambisa asterisk kune zvakasiyana zvinhu nekudzvanya <→> kiyi, iyo yekunyora inodzivirira inogoneswa. Bvisa iyo unit uye tanga zvakare kubva pakutanga.

PW Input(Point work) uye CW(Basa rinoenderera mberi) Input

PARAMETER modhi

Chinja marongero ekutanga

Kuti uchinje kuita PARAMETER modhi, tinya uye ubate iyo kiyi kusvika izwi rekuti "PARAMTR" raonekwa kumusoro kurudyi kwechiratidziro.

PARAMETER Mode Menu

• Kuti uchinje data, zvinodikanwa kudzima chinyorwa chekudzivirira.(P2)
• Mune iyi menyu, kana usingakwanise kufambisa asterisk kune zvakasiyana zvinhu nekudzvanya iyo kiyi, chinyorwa chekudzivirira chinogoneswa. Bvisa chikwata uye tanga zvakare kubva pakutanga.

MANUAL mode

Tarisa kushanda kwesodering

Kuti uchinje kuita MANUAL modhi, tinya uye ubate iyo kiyi kusvika izwi rekuti "MANUAL" rabuda kumusoro kurudyi kwechiratidziro.

MANUAL Mode Menu

• Shandisa makiyi e<↑>ne<↓> kusarudza nhamba yechirongwa chaunoda kuita, wobva watanga chirongwa nekudzvanya key.
• Iko hakuna MUNHU mashandiro eCW.

Alarms

Alarm messages

Kana kusiri kwemaitiro kwaonekwa, alarm lamp inovhenekera uye imwe yeanotevera meseji inoratidzwa. Gadzirisa chakonzera alarm sezviri mumeseji. Kunze kweiyo EMERGENCY STOP alarm, hauzokwanisi kutanga kugadzirisa zvakare kudzamara wadzvanya key.

Pamusoro pezvikanganiso zve hita

Chikonzero chekukanganisa kwekupisa kunogona kunge kuri mune heater, sensor, kana chimwe chikamu chehurongwa. Tarisa kuratidzwa paHAKK.O 653 kana imwe tembiricha controller uye tsvaga chikonzero chekukanganisa.

Kana pasina meseji inoratidzwa

• Dzimwe nguva ALARM lamp inovhenekera uye iyo unit inomira kushanda asi hapana meseji inoratidzwa.
• Mumamiriro ezvinhu akadaro, shandura kuMANUAL mode uye perfon bhuku rekutanga. Izvi zvichaita kuti meseji ibude.

Kana kukanganisa kwakawanda kuchiitika panguva imwe chete

Kana zvikanganiso zvakawanda zvikaitika panguva imwe chete, iwo mameseji ekukanganisa acharatidzwa imwe panguva: kana iko kukanganisa iyo meseji iri kuratidzwa ikozvino inogadziriswa, iyo meseji inonyangarika uye inotevera yekukanganisa meseji ichaonekwa. Kana zvikanganiso zvakawanda zvichisanganisira CYLINDER DOWN kukanganisa, zvisinei, iyi meseji haizoratidzwa. Naizvozvo, kana iyo unit ikasashanda kunyangwe zvikanganiso zvese zvakaratidzwa zvagadziriswa, tarisa kuti uone kana silinda iri paDOWN chinzvimbo.

Interface Specifications

I/O yakabuda

• Transistor yakavhurika muunganidzi yakabuda (DC24V - 100 mA)
• Kana uchibatanidza relay kana zvimwewo, iva nechokwadi chekuisa chivharo chekuvhiya sezvakaratidzwa pasi apa.

I/O mapindiro

• Photocoupler kuisa
  • Ikozvino inosvika 10mA inoyerera ichienda kune yekunze yekupinza.

I/O masekete

[I/ 0]

PW Input

• Iyi ndiyo yekutanga-yekuisa yekunongedza point soldering muAUTO modhi. Point soldering yeO - 99 chiteshi inogona kuitwa nekushandisa iyo PW yekupinda uye chiteshi sarudza yekuisa.

CW Input

• Iyi ndiyo yekutanga-up yekuisa yekuenderera mberi soldering muAUTO modhi.
• Kuenderera mberi nekutengesa kweO - 99 chiteshi chinogona kuitwa nekushandisa iyo CW yekuisa uye chiteshi sarudza yekuisa.

EMERGENCY STOP Input

• Kupinza uku kunomisa solder feeder kana chiratidzo chechimbichimbi chagamuchirwa kubva kune wekunze programmable controller, robhoti, kana zvimwewo. Batanidza ku24G kana isiri kushandiswa.
• Kuiswa uku kunowanzo ON. Kana iyi yaipinza ikavhurwa mushure meEMERGENCY STOP, mamiriro eEMERGENCY STOP anokanzurwa uye sisitimu yodzokera kuAUTO mode.

Mhepo Yekuchenesa Inopinza

• Kana iyo yekuchenesa mhepo inoiswa payakavhurwa, iyo air cleaner solenoid valve iri panhivi yekumashure inovhurwa.

Z2 Cylinder Input

• Z2 cylinder control inogona kuitwa otomatiki nekubatanidza 24P ku1P.
• Paunenge uchishandisa HAKKO robhoti, iyo 24P-1P yekubatanidza haidiwi.

Ready Output

• MuAUTO kana MANUAL modhi, kubuda uku kunobatidzwa kana kugadzirira kwekutanga kwapera.
• Kana paine chikanganiso kana mumodhi isiri yeAUTO kana MANUAL modhi, kubuda uku hakubatike.

END Output

• Inotumira iyo END inobuda chiratidzo zvinoenderana nenguva yechati yenguva.

Error Output

• Tums OFF kana paine uye kukanganisa.

Z2 Cylinder Output

• Uku ndiko kubuda kwekushanda kwe22 cylinder ye soldering iron unit.

I/O connector (kubatanidza exampLe)

LS IN connector

Batanidza kune HAKKO 653 tembiricha controller.

Z2 LS UP

• Iron unit, Air cylinder limit switch yekumusoro magumo (ON pamucheto wepamusoro)

Z2 LS PASI

• Iron unit, Mhepo cylinder muganho switch yakaderera kupera (ON pamucheto wakadzika)

Beater kukanganisa

• Heater kukanganisa, kubuda kubva kune tembiricha controller (OFF kana paine chikanganiso)

FEEDER chibatanidza

Batanidza kune HAKK.O 651 yekudyisa musoro.

Kutsika mota

• Kudyisa musoro kutsika mota

Solder clog

• Vhara yekuona chiratidzo kubva kufeeder head
• (ON kana paine chivharo)

Solder kupera

• Solder kupera chiratidzo kubva kufeeder head
• (IVA apo solder inoshandiswa kumusoro kana kuputsika)

PW kushanda: Point soldering nguva chati

• Panguva yekushanda kwePW, iyo END uye READY zvinobuda zvinobatiswa ZVIMWE kana paine alarm.

CW kushanda: Kuenderera mberi soldering nguva chati

• Panguva yekushanda kweCW, iyo END uye READY zvinobuda zvinobatiswa ZVINODZIMWA kana paine alarm.

Kutsiva Zvikamu

Chikamu Rondedzero yeHAKKO 652 Feed Controller

CONTACTS

HEAD OFFICE

• 45, SHIOKUSA 2-CHOME, NANIWA-KU, OSAKA, 556-0024 JAPAN
• TEL: +81-6-6561-3225
• FAX:+81-6-6561-8466

VAMWE Mhiri kwemakungwa

• USA: AMERICAN HAKKO PRODUCTS, INC.
• 25072 ANZA DA. SANTA CLARITA, CA 91355, USA
• TEL: 661-294-0090
• FAX: 661-294-0096
• Toll Free: (800) 88-HAKKO
• www.hakkousa.com

SPORE: HAKKO PRODUCTS PTE., LTD.

• 1, GENTING LINK #02-04, PERFECT INDUSTRIAL
• KUVAKA, SINGAPORE 349518
• TEL: 748-2277
• FAX: 744-0033

HONG KONG: HAKKO DEVELOPMENT CO., LTD.

• ROOM 1504 EASTERN HARBOUA CENTRE, 28 HOI CHAK STREET, QUARRY BAY, HONG KONG.
• TEL: 2811-5588
• FAX: 2590-0217

FIRIPAINI: Iyo kambani HAKKO PHILS TRADING CO., INC.

• AIHWA. 415 WINDSOR TOWER CONDOMINIUM, 163 LEGASPI ST., LEGASPI VILLAGE MAKATI, METRO MANILA, PHILIPPINES
• TEL: (02)817-0712, 815-4993
• FAX: (02)810-7649

MARAZHIYA: HAKKO PRODUCTS SDN BHD
MALAYSIA HEAD OFFICE: PETALING JAYA

• ROTI 35/1 THE HIGHWAY CENTRE JALAN 51/205 46050
• PETALING JAYA, SELANGOR DA RUL EHSAN, MALAYSIA
• TEL: (03)794-1333
• FAX: (03)791-1232

PENANG BAZI

• TEL: (04)644-6669
• FAX: (04)644-8628

JOHORE BAHRU BAZI

• TEL: (07)236-7766
• FAX: (07) 237-4655

Zvinyorwa / Zvishandiso

HAKKO 652 Feed Controller [pdf] Bhuku reMirayiridzo 652 Feed Controller, 652, Feed Controller, Controller

References

• User Manual