Interface 3AR Sensor
Zvigadzirwa Zvinotsanangurwa
- Zita reChigadzirwa: 3AR Sensor
- Mugadziri: Interface
- Kukwidza Nzvimbo: Kuyera Platform (inofamba divi) uye Stator
- Kusunga: Silinda musoro screws uye cylindrical pini
- Screw Diameter: M20
- Kusimbisa Torque:
- Chikuva chekuyera: 8.8 / 400Nm, 10.9 / 550Nm, 12.9 / 700Nm
- Stator: 8.8 / 400Nm, 10.9 / 550Nm, 12.9 / 700Nm
- Mounting Surface Zvinodiwa:
- High rigidity isina deformation pasi pemutoro
- Flatness: 0.05 kusvika 0.1mm
- Hunhu hwepamusoro: Rz6.3
Mirayiridzo Yekushandiswa Kwechigadzirwa
Kuyeresa Platform Mounting:
Iyo yekuyera yekumisikidza inofanirwa kusungirirwa kune inokwirisa pamusoro peyeyero papuratifomu ye3AR sensor uchishandisa yakatsanangurwa silinda musoro screws uye cylindrical pini.
Matanho:
- Ita shuwa kuti nzvimbo inokwirisa inosangana nezvinodiwa.
- Shandisa screw diameter chaiyo uye torque yekusimbisa sezviri patafura.
- Sunga kuseta ne8x silinda musoro screws uye chinzvimbo chine 2x cylindrical pini.
Stator Mounting:
Iyo 3AR sensor inofanirwa kusungirirwa kune screwing surface ye stator ichitevera mirairo yakapihwa.
Matanho:
- Gadzirira nzvimbo ye stator kuona kuti inosangana nezvinodiwa.
- Shandisa masiruuru anokurudzirwa, maburi maburi, uye ma torque ekusimbisa sezvakaratidzwa mubhuku rekushandisa.
- Chengetedza sensor ne8x silinda musoro screws uye gadzirisa uchishandisa 2x cylindrical pini.
General Zvinyorwa:
- Nguva dzose tarisa kune tafura yakapihwa yekirasi yesimba uye kuomesa torque ruzivo.
- Ita shuwa kudzika kwakaringana sikuru mune yese yekuyeresa chikuva uye stator.
- Tevera ISO zviyero zvekushivirira uye kupera kwepamusoro.
Mibvunzo Inowanzo bvunzwa
- Mubvunzo: Ndinogona kushandisa masiruru akasiyana ekumisikidza sensor?
A: Inokurudzirwa kushandisa yakatsanangurwa cylinder head screws yekumisikidza kuti ive nechokwadi chekuisa uye kuita kwakaringana. - Q: Chii chandinofanira kuita kana iyo inokwirisa nzvimbo isingasangane neiyo zvinodiwa?
A: Izvo zvakakosha kuve neyakaomarara uye yakati sandara inokwira pamusoro. Kana iyo isingasviki zvinodiwa, taurirana nenyanzvi kuti igadzirise nzvimbo isati yaiswa. - Mubvunzo: Zvakakosha here kushandisa ese 8 screws yekusimbisa?
A: Ehe, zvakakosha kushandisa ese 8 cylinder head screws yekunamira yakachengeteka ye sensor kune inokwirisa nzvimbo.
3AR Kuiswa:
Ndokumbira utarise iyo inotevera mirairo yekuisa iyo 3AR zvigadzirwa kubva kuInterface. Nekumisikidzwa kwehunyanzvi, iyo 3AR sensor inofanirwa kusungirirwa kune yakakosha yakamisikidzwa screw nzvimbo.
Kukwirisa pamusoro pekuyera chikuva
Kukwira pamusoro stator
Kukwira pamusoro pezvinodiwa
- high rigidity ye screwing surface, hapana deformation pasi pemutoro
- Kufuratira kweiyo screwing pamusoro 0.05 kusvika 0.1mm
- Unhu hwepamusoro hweiyo screwing surface Rz6.3
| Number | Designation | Simba kirasi/ Kusimbisa torque (Nm) Kuyera chikuva | Simba kirasi/ Kusimbisa torque (Nm) Stator |
| 8 | Cylinder head screw DIN EN ISO 4762 M20 | 8.8 / 400Nm 10.9 / 550Nm 12.9 / 700Nm |
8.8 / 400Nm 10.9 / 550Nm 12.9 / 700Nm |
| 2 | Silinda mapini DIN6325 Ø12m6 |
 |
Standard ISO 128  |
General tolerances ISO 2768- |
Tarisa kune chiziviso chekudzivirira ISO 16016 | |
| Surface finish DHININI IS ISO 1302  |
Iyi 2D dhizaini yakakosha pakugadzira uye kusangana. Alternative file mafomati (eg Danho neDxf) ndeezvekuwedzera ruzivo. | |||
| Thread countersinking DIN 76 pasi pe90 ° kusvika 120 ° kusvika Thread yekunze dhayamita |
Interface, Inc. • 7418 East Helm Drive • Scottsdale, Arizona 85260 USA
Runhare: 480.948.5555
Fax: 480.948.1924
www.interfaceforce.com
Zvinyorwa / Zvishandiso
 |
Interface 3AR Sensor [pdf] Mirayiridzo 3AR Sensor, 3AR, Sensor |
