KEYPLUS K7 Smart Lock

Kuvhura gonhi kwakananga

Shift the left and right handle opening.

According to your need, to adjust the left and right handle opening by a screw driver to release the screw, then turn the handle 180 degrees, and then fix the screw.
Note: Do not unscrew the screw in the handle hole; if it is broken when you do that, you will not have any warranty.

Rongedza nzira yekufa

Zvinoenderana nekuda kwako kugadzirisa iyo mortise direction

Chenjerera usati waiswa

Installation

Check points after installation.n

1. Iyo smart lock iri horizontal nemusuwo.
2. The Latch bolt, Deadbolt,lt, and Security Bolt work smoothly and flexibly.
3. Iyo Front lock yakamira uye yakagadzikana.

Deadbolt setting

The deadbolt area is read-only;d, a non-admin user cannot unlock unless it is an admin user or unlocks with a key.

Smart Lock User Interface Kushanda

Wake up the screen by touching keyboard, press the “*” and “#” keys then input initialize password 123456 and *#” ke to enter initialize menu: (After enter menu, press”* key to return/ press *#” key to confirm) B. First time entering main menu, need to record new password (6 digits with #” key to confirm and repeat) or fingerprint (6 times) as admin user, press “#” key to confirm. Wake up the screen by touching the keyboard, press the “*” and #” keys, then input the admin password and *#” keyor fingerprint to enter the main menu:

Wedzera Vashandisi

1. Press 1 to record a new password (6 digits with # key to confirm and repeat again) or fingerprint (6 times) as a normal user, press # key to confirm.
2. Del Users Press 2 to enter the user no. which need to del then press the # key to confirm.
3. Normally open mode. Press 3 to enable and again to disable. 4: Mute mode Press 4 to enable and again to disable.

How does the smart lock connect to theTuyaa app? ( Suitable for models: 610 & 620 Tuya)

1. Vhura nharembozha yako uye tarisa inotevera QR kodhi kudhawunirodha app.
2. After registering the user, select” Lock Wi-Fi” in “security & sensor” and connect to Wi-Fi according to the software instructions. (onlysupportst Wi-Fnetworksrk the 2.4G band), operate the smart lock to enter the main menu to active connection mode (when entering the main menu, the blue light will start flashing), then connect the smart lock to the network.

Remote kiinura basa

1. Ita shuwa kuti iyo WIFI module yakabatana negore, uye APP inogona view mudziyo.
2. Press “9” + “#” on the door lock to wake up the Tuya module, and the module indicator will light up.
   (Some door locks wake up the module when they are touched; you do not need to press 9#, please operate according to the actual situation.
3. Mirira kuti module ibatane negore. Papeji yekumba yeApp interface, bhatani "Dzvanya kuti uvhure gonhi kure" richaonekwa. Mushure mekudzvanya, inosimbisa kana kukiinura kana kwete.
4. Mushure mekusimbisa kuvhurwa, kukiya kwegonhi kuchavhurwa, uye rutivi rweAPP ruchazivisa kure kure kurekodha yekuvhura (Cherechedza: Hapana rekodhi rekodhi mune yekutanga mamiriro, uye mushandisi anofanirwa kuisirwa musati rekodhi yekuvhura gonhi inogona kutaurwa. )

Remote dynamic password

1. Make sure that the wireless module has been detected at the door lock end, and check the detection information when it is powered on.
2. Ensure that the time of the door lock is accurate with the Beijing time. If the door lock time is not set, please manually enter the administrator setting interface to set the correct time (Note: For some devices without a screen that do not have a time to display or broadcast, this step can be ignored)
3. Click “click to get” under the remote dynamic password on the APP side to get the password.
4. Press “9” + “#” on the door lock to wake up the Tuya module, and the module indicator will light up. (Some door locks are in the touch-to-wake mode)
5. Enter the dynamic password. After the verification is successful, the door lock will be unlocked, and the unlock record will be reported.
   Note: The dynamic password will change every 5 minutes, and each password can be unlocked an unlimited number of times.

Password yenguva

1. Similar to the dynamic password, first ensure that the wireless module has been detected at the door lock end and the time has been calibrated.
2. Create a temporary password on the APP side, enter the password, name, and valid time, and “to be issued” will be displayed after creation.
3. Press “9” + “#” on the door lock to wake up the T12. Temporary password uya module, and the module indicator will light up. (Some door locks wake up the module when they are touched. You do not need to press 9#; please operate according to the actual situation.
4. Wait for the connection to be cestablished After connecting to the Internet, the temporary password of the cloud will be obtained. The status of the temporary password will change from “to be issued” to “in use”, and it can be used.
5. Enter the temporary password. After the verification is successful, the door lock will be unlocked, and the door opening record will be reported. (Note: Unlike the dynamic password, there is no need to wake up the module and then enter the password.)
   Note: The temporary password can be unlockedan unlimited number of times within the valid period.

Technical Parameters

Technical Parameters
	Items	Parameters	Memo
1	Quiscent current	≦50uA
2	Simba razvino	≦180mA
3	Nhamba yevatariri	3
4	Fingerprint nhamba	50
5	Nhamba yePasiwedhi kuchengetedza	100
6	Nhamba yekuchengetedza Kadhi	110
7	Fingerprint kusiyanisa nguva	≦0.6Sekondi
8	Fingerprint scanner	semiconductor
9	Fingerprint identification angle	360°
10	Chokwadi Kuramba Mwero	≦0.15% ≦
11	Kuzivikanwa Rate	0.00004
12	Reaction nguva	≦0.5 Chechipiri
13	Simba rudzi	6V
14	Emergency powering	5VDC
15	Kushanda tembiricha	-25°C~60°C
16	Kushanda Relative Humidity	5% ~ 95%RH
17	KBD	Bata standard 12-bit keyboard
18	Password Length	6bit
19	Phantom password	16bit
20	Yakadzika-voltage alarm	4.8±0.2V
21	Kuvhura nguva	≦1Sekondi
22	Izwi remunhu	Ehe
23	Magetsi	4.5~6.5V(4pcs AAA batteries), up to 182days working time (unlock 10 times/day)

FCC YAMBIRO
Ichi chishandiso chinoenderana nechikamu 15 cheFCC Mitemo. Kushanda kunoenderana nemamiriro maviri anotevera: (1) mudziyo uyu haugone kukonzera kukanganisa kunokuvadza, uye (2) mudziyo uyu unofanirwa kugamuchira chero kukanganisa kunowanikwa, kusanganisira kukanganisa kunogona kukonzera kushanda kwausingadi.
Chero shanduko kana zvigadziriso zvisina kutenderwa nebato rine chekuita nekutevedzwa zvinogona kukanganisa mushandisi simba rekushandisa mudziyo.
CHERECHEDZA: Midziyo iyi yakaedzwa uye yakawanikwa inoenderana nemiganhu yeKirasi B yedhijitari mudziyo, zvichienderana neChikamu 15 cheFCC Mitemo. Iyi miganho yakagadzirirwa kupa dziviriro inonzwisisika kubva mukukanganisa kunokuvadza mukuiswa kwekugara. Midziyo iyi inogadzira, inoshandisa, uye inogona kuvheneka redhiyo frequency simba uye, kana isina kuiswa uye kushandiswa zvinoenderana nemirairo, inogona kukonzera kukanganisa kunokanganisa kufambiswa kweredhiyo. Nekudaro, hapana vimbiso yekuti kukanganisa hakuzoitika mune imwe yekumisikidza.
Kana mudziyo uyu ukakonzera kukanganisa kunokanganisa redhiyo kana terevhizheni,
iyo inogona kutariswa nekudzima michina nekubatidza, mushandisi anokurudzirwa kuyedza kugadzirisa kukanganiswa neimwe kana anopfuura eanotevera matanho:

• Reorrent kana kutamisa antenna inogamuchira.
• Wedzera kupatsanurwa pakati pemidziyo nemugamuchiri.
• Batanidza midziyo mune yekubuda padunhu rakasiyana neiyo iyo inotambirwa yakabatana.
• Bvunza mutengesi kana nyanzvi yeredhiyo/TV ine ruzivo kuti ubatsirwe.

To maintain compliance with the CC’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm from the radiator of your body. Use only the supplied antenna.

Zvinyorwa / Zvishandiso

KEYPLUS K7 Smart Lock [pdf] Bhuku reMirayiridzo K7, K7 Smart Lock, Smart Lock, Kiya

References

• User Manual