MaxN2+
Mirayiridzo Yekushandisa

Chigadzirwa Kurasa Mirayiridzo:
Iyo sensor, mabhatiri, uye bhodhi redunhu hazvina kukodzera kugara uchirasa marara. Dzosera sensor kuMaxtec kuti iraswe kana kuraswa zvinoenderana negwara renzvimbo. Tevera mirairo yemunharaunda yekurasa zvimwe zvikamu.

CLASSIFICATION

Dziviriro kubva kumagetsi emagetsi:………………………………………….. Midziyo ine simba remukati.
Dziviriro pamvura: ………………………………………………………………………………………………………………………………………………………………
Mashandiro: ………………………………………………………………………………………………………
Kuzarisa: ………………………………………………………………………………………………………………………………………………………
Musanganiswa unopisa weanesthetic: ……………………………………….. Hauna kukodzera kushandiswa paine a
……………………………………………………………………………………………………. musanganiswa unopisa weanesthetic

WARRANTY

The MaxN2+ analyzer is designed for nitrogen delivery equipment and systems. Under normal operating conditions, Maxtec warrants the MaxN2+  analyzerto be free from defects of workmanship or materials for a period of2-years from the date of shipment from Maxtec, provided that the unit is properly operated and maintained in accordance with Maxtec’s operating instructions. Based on Maxtec’s product evaluation, Maxtec’s sole obligation under the foregoing warranty is limited to making replacements, repairs, or issuing credit for equipment found to be defective.  This warranty extends only to the buyer purchasing the equipment directly. Maxtec’s sole obligation under the foregoing warranty is limited to making replacements, repairs, or issuing credit for equipment found to be defective. This warranty extends only to the buyer purchasing the equipment directly from Maxtec through Maxtec’s designed distributors and agents as new equipment.
Maxtec inobvumira sensor yeokisijeni iri mu  axN2+ analyzer kuti ive isina kukanganisa mune zvinhu uye magadzirirwo kwenguva ye2-makore yeNitrogen A & AE uye 1-gore reNitrogen A Fast kubva pazuva raMaxtec rekutumirwa muMaxN2+ analyzer. Kana sensor ikatadza nguva isati yakwana, iyo yekutsiva sensor inotenderwa kune yasara yeiyo yekutanga sensor waranti nguva.
Zvinhu zvekugadzirisa nguva dzose, zvakadai semabhatiri, hazvibatanidzwi kubva muwaranti. Maxtec uye chero mamwe masubsidiary haazove nemhosva kumutengi kana vamwe vanhu nekuda kwekukuvadza kana kukonzeresa kana midziyo yanga iri pasi pekushungurudzwa, kushandiswa zvisizvo, kushandiswa zvisizvo, kuchinjwa, kuregeredza, kana tsaona.
Mawaranti aya ndeega uye pachinzvimbo chezvimwe zvese waranti, zvinoratidzwa kana kurehwa, kusanganisira waranti yekutengesa uye kusimba kune chimwe chinangwa.

YAMBIRO

Inoratidza mamiriro anogona kuva nenjodzi, kana asina kudzivirirwa, anogona kukonzera kufa kana kukuvara zvakanyanya.

• Kushandiswa zvisina kunaka kwechigadzirwa ichi kunogona kukonzera kuverengera kusinganzwisisike kweokisijeni izvo zvinogona kutungamira mukurapwa kwakashata, hypoxia, kana hyperoxia. Tevedzera maitiro ataurwa mubhuku rino rekushandisa.
• Chigadzirwa chacho chinotarirwa gasi rakaoma chete.
• Usati washandisa, vanhu vese vachange vachishandisa MaxN2+ Analyzer vanofanira kunyatsoita
• vanoziva ruzivo rwuri muBhuku reKushanda rino. Kunyatsoomerera kune mirairo yekushanda kunodiwa kune yakachengeteka, inobudirira chigadzirwa kuita.
• Ichi chigadzirwa chinoita chete sekugadzirwa kana yaiswa uye ikashanda zvinoenderana nemirayiridzo yekugadzira.
• Shandisa chete chaiwo Maxtec accessories uye zvinotsiva zvikamu. Kukundikana kuita kudaro kunogona kukanganisa zvakanyanya kushanda kwemuongorori. Kugadziriswa kwemudziyo uyu kunofanirwa kuitwa nenyanzvi yebasa ane ruzivo mukugadzirisa kwemidziyo inotakurika inobatwa nemaoko.
• Gadzirisa iyo MaxN2 + Analyzer vhiki nevhiki kana iri kushanda, kana kana mamiriro ekunze akachinja zvakanyanya. (kureva, Kukwidziridzwa, Tembiricha, Kumanikidza, Humidity — tarisa Chikamu 3.0 chebhuku rino).
• Kushandiswa kweMaxN2+ Analyzernear zvishandiso zvinogadzira minda yemagetsi zvinogona kukonzera kuverenga kusinganzwisisike.
• Kana iyo MaxN2+ Analyzer ikambofumurwa kune zvinwiwa (kubva pakurasa kana kunyudzwa) kana kune kumwe kushungurudzwa kupi zvako, DZIDZA chiridzwa chacho wobva WABATIDZA. Izvi zvinobvumira iyo unit kuti iende kuburikidza neyayo yekuzviyedza kuti ive nechokwadi chekuti zvese zviri kushanda nemazvo. Usambofa wakazviitira autoclave, kunyudza kana kufumura iyo MaxN2+Analyzer (kusanganisira sensor) kune tembiricha yepamusoro (> 70°C). Usambofa wakafumura mudziyo mukumanikidzwa, irradiation vacuum, steam, kana makemikari.
• Ichi chishandiso hachina otomatiki barometric kumanikidza muripo.
• Kunyange zvazvo sensor yechigadzirwa ichi yakaedzwa nemagasi akasiyana-siyana anosanganisira nitrous oxide, Halothane, Isoflurane, Enflurane, Sevoflurane, uye Desflurane uye yakawanikwa iine kupindira kwakaderera kunogamuchirwa, chigadzirwa chacho chose (kusanganisira magetsi) hachina kukodzera kushandiswa pamberi. yemusanganiswa unobvira weanesthetic nemhepo kana neoxygen kana nitrous oxide. Iyo chete yakaomeswa sensor face, inoyerera diverter, uye "T" adapta inogona kubvumidzwa kubata gasi musanganiswa wakadaro.
• HASI yekushandiswa neinofema. Kushandisa mudziyo unobvira kana mhepo inoputika inogona kukonzera moto kana kuputika.

CHENJERERO

Inoratidza mamiriro anogona kuva nenjodzi, kana akasadzivirirwa, anogona kukonzera kukuvara kudiki kana kwepakati uye kukuvara kwepfuma.

• Tsiva mabhatiri nemabhatiri anozivikanwa emhando yepamusoro AA Alkaline kana Lithium.
  USA shandisa mabhatiri anochajika.
• Kana iyo unit ichizochengetwa (isiri kushandiswa kwemwedzi mumwe), tinokurudzira kuti ubvise mabhatiri kudzivirira iyo unit kubva kungangoitika kubheja kwebhatiri.
• Iyo Maxtec Max-250 okisijeni sensor chinhu chakavharirwa chine munyoro acid electrolyte, lead (Pb), uye lead acetate. Tungamira uye tungamira acetate zvinhu zvine njodzi marara uye zvinofanirwa kuraswa nenzira kwayo, kana kudzoserwa kuMaxtec kuitira kuraswa kwakanaka kana kupora.
  USA shandisa ethylene oxide sterilization.
  USA nyudza sensor mune chero mhinduro yekuchenesa, autoclave, kana kufumura sensor kune tembiricha yakakwira.
• Kudonhedza sensor kunogona kukanganisa kuita kwayo.
• Chishandiso chinozotora chikamu cheoxygen concentration kana ichigadzirisa. Iva nechokwadi chekuisa 100% oxygen, kana ambient air concentration pamudziyo panguva yekugadzirisa, kana kuti mudziyo hauzokwenenzverwa nemazvo.

CHERECHEDZA: Ichi chigadzirwa hachina latex.

CHIRATIDZO GUIDE

Aya anotevera zviratidzo uye ekuchengetedza zvinyorwa uye anowanikwa pane iyo MaxO2 +:

PAKUPEDZAVIEW

Base Chikamu Tsananguro

Iyo MaxN2 + analyzer inopa isingaenzaniswi kuita uye kuvimbika nekuda kwedhizaini yepamberi inosanganisira zvinotevera maficha uye mabhenefiti ekushanda.

• Yekuwedzera-yehupenyu oxygen sensor ingangoita 1,500,000 O2 muzana maawa (2-makore waranti)
• Yakareba, compact dhizaini iyo inobvumidza yakasununguka, ruoko-rwakabata mashandiro uye nyore kuchenesa
• Kushanda uchishandisa maviri chete AA Alkaline mabhatiri (2 x 1.5 Volts) ye
• Anenge maawa 5000 ekushanda nekuenderera mberi kushandiswa. Kwekuwedzera hupenyu hwakareba, maviri AA Lithium mabhatiri anogona kushandiswa.
• Oxygen-specific, galvanic sensor inowana 90% yekukosha kwekupedzisira mumasekonzi angangoita gumi nemashanu pakudziya kwekamuri.
• Yakakura, iri nyore kuverenga, 3 1/2-manhamba eLCD ekuratidzira ekuverenga mune 0-100% renji.
• Nyore oparesheni uye nyore mumwe-kiyi calibration.
• Kuzviongorora-kuongorora cheanalogog uye microprocessor wedunhu.
• Low bhatiri chiratidzo.
• Calibration chiyeuchidzo timer iyo inonyevera anoshanda, achishandisa calibration icon pane iyo LCD inoratidzira, kuita yuniti calibration.

Component Identification

1. 3-DIGIT LCD kuratidzira - Iyo 3 digit liquid crystal display (LCD) inopa kuverengwa kwakananga kwehuwandu hweokisijeni muhuwandu hwe0 - 105.0% (100.1% kusvika 105.0% inoshandiswa pakugadzirisa zvinangwa zvekugadzirisa). Iwo manhamba anoratidzawo kukanganisa kodhi uye calibration macode sezvinodiwa.
2. PASI BATTERY Ratidza - Iyo yakaderera bhatiri chiratidzo chiri kumusoro kwechiratidziro uye inongoitwa kana voltage pamabhatiri ari pazasi peyakajairika mashandiro.
3. “%” SYMBOL — Chiratidzo che "%" chiri kurudyi rwenhamba yevasungwa uye chiripo panguva yekushanda kwakajairika.
4. CALIBRATION SYMBOL -Chiratidzo chekuenzanisa chiri pazasi pechiratidziro uye chakamisikidzwa kuti chiite kana calibration ichidikanwa.
5. KII YEKUVISA/KUDZIMIRA —Iyi kiyi inoshandiswa kudzima kana kudzima chishandiso.
6. CALIBRATION KEY —Iyi kiyi inoshandiswa kudzikamisa chishandiso. Kubata kiyi kweanopfuura masekondi matatu kunomanikidza mudziyo kuti upinde calibration modhi.
7. SAMPLE INLET CONNECTION - Iri ndiro chiteshi chakabatanidzwa nechigadzirwa kuona huturu hweoksijeni.

Max-250 okisijeni Switch

Iyo MAX-250 Series oxygen sensors inopa kugadzikana uye humwe hupenyu. Iyo MAX-250 Sensors ndeye galvanic, partial pressure sensors yakanangana neokisijeni. Iyo ine ma electrode maviri (cathode uye anode), Teflon membrane, uye electrolyte. Oxygen inopararira kuburikidza neTeflon membrane uye pakarepo inopindira pane cathode yegoridhe. Saizvozvo, oxidation inoitika electrochemically pane inotungamira anode, ichigadzira magetsi uye inopa vol.tage output. Electrodes akanyudzwa mune yakasarudzika gelled isina simba acid electrolyte inokonzeresa hupenyu hurefu hwe sensor uye kusanzwa kwekufamba hunhu. Sezvo sensor yakanangana neokisijeni, ikozvino inogadzirwa yakaenzana nehuwandu hweokisijeni huripo mu sample gas. Kana pasina okisijeni iripo, hapana electrochemical reaction uye saka, inoregeredza ikozvino inogadzirwa. Mupfungwa iyi, iyo sensor inozvimiririra yega

OPERATING MIrairo

Kutanga

1. Chengetedza Tape
Usati wadzima yuniti, firimu rekudzivirira rakafukidza iyo yakamisikidzwa sensor kumeso inofanira kubviswa. Mushure mekubvisa iyo firimu, mirira ingangoita maminetsi makumi maviri kuti iyo sensor isvike kuenzana.
2. Automatic Calibration
Mushure mekunge iyo yuniti yashandurwa inozozvinongedza yega kune yemukati mhepo. Iyo yekuratidzira inofanirwa kuve yakasimba uye kuverenga 79.1%.
CHENJERERO: Chishandiso chinozotora chikamu cheoxygen concentration kana ichigadzirisa. Iva nechokwadi chekuisa 100% oxygen, kana ambient air concentration pamudziyo panguva yekugadzirisa, kana kuti mudziyo hauzokwenenzverwa nemazvo.

Kuongorora iko kukanganiswa kweoksijeni seample gesi: (mushure mekunge yuniti yayerwa):

1. Batanidza iyo Tygon tubing kuzasi kweanalyzer nekupinza iyo barbed adapta pane iyo oxygen sensor. (MUFANANIDZO 2)
2. Batanidza mumwe mugumo weiyo sample hose kune iyo sample gasi sosi uye tanga kuyerera kwe sample kuuniti pachiyero che1-10 litita paminiti (2 litita paminiti inokurudzirwa).
3. Uchishandisa "ON / OFF" kiyi, ita shuwa kuti iyo unit iri musimba "ON" maitiro.
4. Bvumira kuverenga kwe nitrogen kudzikamisa. Izvi zvinowanzotora masekonzi makumi matatu kana kupfuura.

Kugadzirisa iyo MaxN2 + Analyzer

Iyo MaxN2 + analyzer inofanirwa kuverengerwa pane yekutanga simba-kumusoro. Pashure pacho, Maxtec anokurudzira kuenzanisa pavhiki. Kushanda sechiyeuchidzo, chibatiso chevhiki imwe chete chinotangwa nekugadzirisa kutsva kwega kwega. Pakupera kwevhiki imwe chiyeuchidzo icon" ” ichaonekwa pazasi peLCD. Calibration inokurudzirwa kana mushandisi asina chokwadi pakaitwa yekupedzisira calibration maitiro, kana kana kuyerwa kukosha kuri mubvunzo.
Tanga calibration nekudzvanya iyo kiyi kweanopfuura masekonzi matatu. Iyo MaxN3+ inozoona yega kana uri kugadzirisa ne2% okisijeni kana 100% okisijeni (mhepo yakajairika). Usaedza kuenderana nechero imwe pfungwa.
USA edza kuenzanisa kune imwe pfungwa.

Mhepo yakadzvanywa (79.1% N2), calibration nyowani inodiwa kana:

• Iyo yakayerwa N2 muzanatage mu 79.1% N2 iri pamusoro pe80.1% N2.
• Iyo yakayerwa N2 muzanatage mu 79.1% N2 iri pazasi 78.1% N2.
• Iyo CAL yekuyeuchidza icon iri kubhenekera pazasi kweLCD.
• Kana usina chokwadi nezve N2 yakaratidzwa muzanatage. (Ona zvinhu zvinopesvedzera kuverenga kwakarurama.)

Yakareruka calibration inogona kuitwa ine sensor yakavhurika kune static paAmbient mhepo. Kuti uwane huroyi hwakanyanya, Maxtec inokurudzira kuti sensor iiswe mune yakavharwa-loop wedunhu uko kuyerera kwegasi kuri kufamba kuyambuka sensor nenzira inodzorwa.
Gadzirisa nemhando imwechete yedunhu uye kuyerera kwauchashandisa mukutora kuverenga kwako.

Kushanda neFlow Restrictor

1. Batanidza iyo Barbed Adapter kuMaxN2 + analyzer nekuiisa pazasi pe sensor.
2. Batanidza Tygon chubhu kune barbed adapta.
3. Batanidza BC adapta kune imwe magumo eTygon chubhu.
4. Batanidza hose ye inflator kune rumwe rutivi rweTygon chubhu
5. Kana iyo MaxN2+ analyzer isati yabatidzwa, ita izvozvi nekudzvanya analyzer "ON" bhatani.
6. Tanga kuyerera kwe nitrox kune iyo unit kubvumira gasi kuti rizadze sensor. Iyo BC adapta inogadzirisa kuyerera kwakanyanya uye kudzvanywa. Kunyange zvazvo kukosha kwakagadzikana kunowanzoonekwa mukati memasekondi e30, bvumira zvishoma maminetsi maviri kuti uone kuti sensor yakazara zvakakwana negesi.
7. Iyo analyzer ikozvino ichatsvaga yakagadzikana sensor chiratidzo uye kuverenga kwakanaka. Kana yawanikwa, analyzer inoratidza iyo oxygen percencetage paLCD

ZVINHU ZVINOITA
KUVERENGA KWAZVO

Kumusoro / Kumanikidza Shanduko

• Shanduko mukukwirira dzinoguma nekanganiso yekuverenga ingangoita 1% yekuverenga pamamita mazana maviri nemashanu.
• Kazhinji, calibration yechiridzwa inofanira kuitwa.

Tembiricha Migumisiro

Iyo MaxN2+ analyzer inobata calibration uye kuverenga nemazvo mukati me ± 3% kana iri mukudziya kwekudziya mukati meiyo tembiricha yekushanda. Mudziyo wacho unofanira kunge wakagadzikana kana uchinge wagadziridzwa uye wotenderwa kudzikamiswa mushure mekuchinja kwetembiricha usati kuverenga kwakarurama. Nokuda kwezvikonzero izvi, zvinotevera zvinokurudzirwa:

• Kuti uwane mhedzisiro, ita maitiro ekudzora pane tembiricha padyo netembiricha uko kunoitika kuongorora.
• Bvumira yakakwana nguva yeiyo sensor kuti ienzane kune itsva ambient tembiricha.

CHENJERERO: "CAL Err St" inogona kukonzeresa kubva kune sensor iyo isina kusvika kune yekupisa equilibrium.

Dzvinyiriro Mhedzisiro

Kuverenga kubva kuMaxN2+ analyzer inoenderana nechikamu chekumanikidza kweokisijeni. The partial pressure yakaenzana neconcentration times the absolute pressure. Nokudaro, kuverenga kwakaenzana nekugadzirisa kana kumanikidzwa kunoitwa nguva dzose. Nokudaro, zvinotevera zvinokurudzirwa

• Calibrate iyo MaxN2 + analyzer panguva imwechete yekumanikidza se sample gas.
• Kana sampmagasi anoyerera kuburikidza netubing, shandisa zvakafanana zvishandiso uye kuyerera kwemitengo kana uchienzanisa sepakuyera.
• Iyo MaxN2 + analyzer oxygen sensor yakaedzwa pakumanikidzwa kusvika kune maviri anga akazara. Calibration kana kushanda pamusoro pekumanikidza uku kunopfuura kushandiswa kwakarongwa.

Humidity Migumisiro

Humidity (isina-kudonhedza) haina mhedzisiro pakuita kweMaxN2 + analyzer kunze kwekunatsa gasi, chero pasina condensation. Zvichienderana nehunyoro, gasi rinogona kuderedzwa neanosvika 4%, iyo inoderedza kuderedzwa kweokisijeni. Chigadzirwa chacho chinopindura kune iyo chaiyo oksijeni concentration pane iyo yakaoma concentration. Mamiriro ezvinhu, panogona kuitika condensation, inofanira kudzivirirwa sezvo unyoro hunogona kukanganisa mafambiro egasi kunzvimbo inonzwa, zvichikonzera kuverenga kusina kururama uye nguva yekupindura zvishoma nezvishoma. Nokuda kwechikonzero ichi, zvinotevera zvinokurudzirwa:

• Dzivisa kushandiswa munzvimbo dzakakura kupfuura 95% humidity.

RUBATSIRO RINOBATSIRA: Dry sensor nekungodzungunusa hunyoro kunze, kana kuyerera yakaoma gasi pamalita maviri paminiti kune iyo sensor membrane.

CALIBRATION MAKANHU UYE
Kanganiso Makodhi

Iwo maMaxN2+ analyzer ane yekuzviyedza ficha yakavakirwa musoftware kuona zvisizvo macalibrations, oxygen sensor kutadza, uye yakaderera kushanda vol.tage. Izvi zvakanyorwa pazasi uye zvinosanganisira zvaunogona kutora kana kodhi yezvikanganiso yaitika.
E02: Hapana sensor yakasungirirwa

• Vhura ruoko rweMaxN2+ analyzer uye bvisa uye ubatanidze sensor. Yuniti inofanirwa kuita auto-calibration uye inofanira kuverenga 79.1%. Kana zvisiri, bata Mutengi Sevhisi kuti zvigone kutsiva sensor.

E03: Hapana chechokwadi calibration data iripo

• Ita shuwa kuti iyo unit yasvika pakuyedza kupisa. Dzvanya uye bata Bhatani reCalibration kwemasekonzi matatu kuti umanikidzire nemaoko kugadzirisa kutsva.

E04: Bhatiri pazasi kushoma kushanda voltage

• Tsiva mabhatiri.
  CAL ERR ST: O2 Sensor kuverenga haina kugadzikana
• Mirira kuverenga kweokisijeni yaratidzwa kuti igadzikane paunenge uchigadzirisa mudziyo pa100% oxygen.
• Mirira kuti yuniti isvike pakudziya kwekushisa, (Ndokumbira utarise kuti izvi zvinogona kutora nguva inosvika hafu awa kana mudziyo ukachengetwa mutembiricha kunze kwetembiricha yakatarwa).

CAL ERR LO: Sensor voltage yakaderera

• Dzvanya uye bata Bhatani reCalibration kwemasekonzi matatu kuti umanikidzire nemaoko kugadzirisa kutsva. Kana iyo unit ikadzokorora kukanganisa uku kanopfuura katatu, bata Maxtec Mutengi Sevhisi kuti igone kutsiva sensor.

CAL ERR HII: Sensor voltage zvakanyanyisa

• Dzvanya uye bata Bhatani reCalibration kwemasekonzi matatu kuti umanikidzire nemaoko kugadzirisa kutsva. Kana iyo unit ikadzokorora kukanganisa uku kanopfuura katatu, bata Maxtec Mutengi Sevhisi kuti igone kutsiva sensor.

CAL ERR BAT: Bhatiri voltagyakanyanya kuderera kuti igone kuverenga zvekare

• Tsiva mabhatiri.

KUCHINJA MABHIRI

Mabhatiri anofanirwa kuchinjwa nevashandi vebasa.

• Shandisa mabhatiri ezita chete.
• Tsiva nemabhatiri maviri eAA uye wobva waisa pakatariswa kwakatarwa pachigadzirwa.

Kana mabhatiri achida kuchinja, chishandiso chinoratidza izvi neimwe yenzira mbiri:

• Iyo bhatiri icon pazasi pechiratidziro ichatanga kupenya. Ichi chiratidzo chichaenderera kupenya kusvikira mabhatiri achinja. Chikwata ichi chichaenderera mberi chichiita zvakajairika kune approx. Maawa mazana maviri.
• Kana chishandiso chikaona bhatiri rakadzika kwazvo, kodhi yekukanganisa ye "E04" ichave iripo pachiratidziro, uye iyo unit haizoshande kusvikira mabhatiri achinja.

Kuti uchinje mabhatiri, tanga nekubvisa masikuru matatu kubva kumashure kwechigadzirwa. A # 1 Phillips screwdriver inodikanwa kuti ibvise idzi screws.
Kana ma screws abviswa, zvinyoronyoro paradzanisa hafu mbiri dzemudziyo. Mabhatiri ava kukwanisa kuchinjwa kubva kuseri kwehafu yekesi. Iva nechokwadi chekutarisa mabhatiri matsva sezvakaratidzwa mune embossed polarity pane yekumashure kesi.

CHERECHEDZA: Kana mabhatiri akaiswa zvisirizvo mabhatiri haachafambidzana uye mudziyo haushande.
Nekuchenjera, unza mahafu maviri ekesi pamwe chete uchiisa waya kuti dzisapinyirwa pakati pemahafu ekesi. Iyo gasket inoparadzanisa mahafu ichabatwa pane yekumashure kesi hafu. Dzorera ma screws uye simbisa kusvika ma screws anyatsogadzikana. (MUFANANIDZO 3)
Chishandiso ichi chinozongoita calibration uye chotanga kuratidza % yeokisijeni.
RUBATSIRO RINOBATSIRA: Kana iyo unit isingashande, tarisa kuti screws dzakasimba kuti dzibvumire kubatanidza kwemagetsi kwakakodzera.

KUCHINJA OXYGEN SENSOR

MaxN2+ A (R217P67)

Kana iyo okisijeni sensor inoda kuchinjwa, chishandiso chinoratidza izvi nekuburitsa "Cal Err lo" pachiratidziro mushure mekutanga calibration.
Kuti uchinje iyo oxygen sensor, tanga nekubvisa iwo matatu screws kubva kumashure kwechigadzirwa.

A # 1 Phillips screwdriver inodikanwa kuti ibvise idzi screws.
Kana zvimisikidzo zvabviswa, nyatsopatsanura hafu mbiri dzechigadzirwa.
Dzinga sensor yeoksijeni kubva kubhodhi redunhu rakadhinda nekudzvanya iyo yekuvhura lever kutanga uye wozodhonza chinobatanidza kunze kwechigadziro. Iyo sensor yeoksijeni ikozvino inogona kutsiviwa kubva kumashure kwehafu yenyaya.
RUBATSIRO RINOBATSIRA: Ive neshuwa yekutungamira iyo nyowani nyowani nekumisikidza iyo tsvuku museve pane iyo sensor nemuseve mune yekumashure kesi. Iyo tabo diki iri pane yekumashure kesi iyo yakagadzirirwa kubatanidza iyo sensor uye kudzivirira iyo kubva kutenderera mukati mekesi. (MUFANANIDZO 4)
CHERECHEDZA: Kana iyo okisijeni sensor ikaiswa zvisirizvo, iyo kesi haizodzoka pamwe chete uye iyo unit inogona kukuvara kana iyo screws yadzoreredzwa.
CHERECHEDZA: Kana iyo senji nyowani iine tsvuku tepi pamusoro pekunze, bvisa, wozomirira maminetsi makumi matatu usati waenzanisa.
Dzorera zvakare okisijeni sensor kune chinobatanidza pane rakadhindwa redunhu bhodhi. Ngwarira kuunza mahafu maviri enyaya pamwe chete uchimisa waya kuti uone kuti haasungwa pakati pemakesi maviri emakesi. Ita shuwa kuti iyo sensor yakanyatso kuisirwa uye munzira kwayo.
Dzorera ma screws uye simbisa kusvika ma screws anyatsogadzikana. Iva nechokwadi chokuti chikwata chinoshanda zvakanaka.
Chishandiso ichi chinozongoita calibration uye chotanga kuratidza % yeokisijeni.

MaxN2+ AE (R217P66)

Kana iyo okisijeni sensor inoda kuchinjwa, chishandiso chinoratidza izvi nekuburitsa "Cal Err lo" pachiratidziro.
Unthread sensor kubva patambo nekutenderedza thumbscrew connector counterclockwise uye kudhonza sensor kubva pakubatanidza.
Tsiva iyo sensor nyowani nekuisa plug yemagetsi kubva patambo yakasungirirwa muchigadziko cheokisijeni sensor. Tenderedza chigunwe chechigunwe chakanangana newachi kusvika chanyatsogadzikana.
Mudziyo wacho uchaita calibration otomatiki uye wotanga kuratidza % yenitrogen.

KUCHENA UYE KUTARIRA

Chengetedza MaxN2+ analyzer mutembiricha yakafanana neyakakomberedza nharaunda yekushandiswa kwemazuva ese. Murairo wakapihwa pazasi unotsanangura nzira dzekuchenesa uye kuuraya hutachiona sensor sensor nezvimwe zvayo:
Kuchenesa Instrument:

• Kana uchichenesa kana kuisa utachiona kunze kweiyo N2 analyzer, chengetedza zvakakodzera kudzivirira chero mhinduro kupinda muchiridzwa.
  USA nyudza chikwata mumvura.
• Iyo MaxN2+ analyzer yepamusoro inogona kucheneswa uchishandisa nyoro yekugezesa uye jira nyoro.
• Iyo MaxN2+ analyzer haina kuitirwa chiutsi, ethylene oxide, kana radiation sterilization.

Okisijeni Switch:
YAMBIRO: Usambofa wakaisa sensor munzvimbo inozoburitsa sensor kumhepo yakafemerwa yemurwere kana zvakavanzika, kunze kwekunge iwe uchifunga kurasa sensor, kuyerera diverter, uye tee adapter mushure mekushandisa.

• Chenesa iyo sensor nemucheka wakanyoroveswa nesopropyl doro (65% doro / mhinduro yemvura).
• Maxtec haikurudzire kushandiswa kwemishonga yekupfapfaidza nekuti inogona kuve nemunyu, iyo inogona kuungana mu sensor membrane uye kukanganisa kuverenga.
• Iyo okisijeni sensor haina kuitirwa mhepo, ethylene oxide, kana radiation sterilization.

Zvishandiso
Iyo shinda ine barbed adapta inogona kucheneswa nekuwacha ne 65% doro / mvura mhinduro (pamurairo wemugadziri). Zvikamu zvinofanira kunyatsooma zvisati zvashandiswa. Nekuda kwekusiyana kwemaitiro ekuchenesa, Maxtec haigone kupa mirairo chaiyo. Nokudaro, isu tinokurudzira zvikuru kutarisa kune mirairo yemugadziri pane tsanangudzo yenzira.

SECIFICATIONS

Base Unit Magadzirirwo

Measurement Range: ……………………………………………………………………………………………………….0-100%
Sarudzo: …………………………………………………………………………………………………………………………..0.1%
Kurongeka uye Linearity: …….1% yechiyero chakazara pane inogara tembiricha, R.H., uye kudzvanywa kana
…………………………………………………………………………………………………………………
Kunyatsorongeka: …………………………………………………… ± 3% chaiyo mwero weokisijeni pane yakazara kushanda tembiricha.
Nguva Yekupindura: ………………………………….. 90% yekukosha kwekupedzisira mukati memasekonzi gumi nemashanu pa15˚C
Nguva yekudziya: …………………………………………………………………………………………….
Kushanda Tembiricha: …………………………………………………………………….15˚C – 40˚C (59°F – 104°F)
Kuchengetedza Kupisa: …………………………………………………………………………-15˚C – 50˚C (5°F – 122°F)
Humidity: ………………………………………………………………………………………….0-95% (isina-condensing)
Simba Rinodiwa: ……………………………………………………………2, AA Alkaline mabhatiri (2 x 1.5 Volts)
Upenyu Hwebhatiri:………………………………………………………….. ingangoita maawa 5000 nekushandisa nguva dzose
Low Battery Indication: …………………………………………………………………….BAT icon inoratidzwa paLCD
Sensor Type: ………………………………………………………………………………………………….. Galvanic fuel cell
Hunotarisirwa Sensor Hupenyu: …………………………………………………………………….. > 1,500,000 O2 muzana maawa
…………………………………………………………………………………………….. makore mashoma maviri-mumanyorerwo akajairika
Model Dimensions: ……………………………………………………………………….. 3.0″ (W) x 4.0″ (H) x 1.5″ (D)
………………………………………………………………………………………………………….. (76mm x 102mm x 38mm)
Weight: …………………………………………………………………………………………………………………… 0.4 lbs (170g)

Sensor Magadzirirwo

Type: ……………………………………………………………………………………………. Galvanic mafuta sensor (0-100%)
Hupenyu: ………………………………………………………………. 2-makore mune zvakajairwa kunyorera Nitrogen A & AE
…………………………………………………………………………….1-gore mune zvakajairika kushandiswa kweNitrogen A Fast

MAXN2+ SPARE PARTS uye ACCESSORIES

Yakatsiviwa Yekutsiva Zvikamu uye zvishongedzo

CHIKAMU NUMBER	ITEM
R12202-011	Max-250. Oxygen Sensor
R12203-002	Max-250E Kwezvokudya Nemiti Switch
R217PO8	Gasket
RPO6P25	,14-40 Pan Head Stainless Steel Screw
R217P16-001	Front Assembly (Inosanganisira Board & LCD)
R217P11-002	Kudzoka Gungano
R217P09-001	Overlay

Optional Accessories

Inesarudzo Adapter

CHIKAMU NUMBER	ITEM
RPI6POZ	Bhuruu Tee Adapter
RI03P90	Perfusion Tee Adapter
RP16P12	Yakareba-Mutsipa Tee Adapter
RP16P05	Chiremba Tee Adapter
RP16P10	MAX-Oukk Batanidza
R207P17	Threaded Adapter ine Tygcn Tubing

Kuisa Sarudzo (inoda dovetail R217P23)

CHIKAMU NUMBER	ITEM
R206P75	Pole Gomo
R205P86	Weil Mount
RIODP10	Rail Gomo
R213P31	Swivel Gomo

Kutakura Options

CHIKAMU NUMBER	ITEM
R2I7P22	Belt Clip uye Pini
R2I3P0Z	Zipper Inotakura Case ine Bendekete Strap
R213P56	Deluxe Kutakura Case. Chiedza chemvura
R217P32	Soft Case. light Fit Kutakura Case

CHERECHEDZA: Kugadziriswa kwemidziyo iyi kunofanirwa kuitwa nenyanzvi yebasa ane ruzivo mukugadzirisa kweruoko runotakurika
akabata midziyo yekurapa.
Zvishandiso zvinoda kugadziriswa zvinotumirwa ku:
Maxtec
Dhipatimendi Rebasa
2305 South 1070 West
Munyu Lake Lake, Ut 84119
(Sanganisira nhamba yeRMA yakapihwa nebasa revatengi)

2305 South 1070 West
Salt Lake City, Utah 84119
800-748-5355
www.maxtec.com

Maxtec
2305 South 1070 West
Salt Lake City, Utah 84119
USA
runhare: (800) 748.5355
Fax: (801) 973.6090
email: sales@maxtec.com
web: www.maxtec.com
Inoenderana ne:
AAMI STD ES60601-1, ISO STD
80601-2-55, IEC STD 606011-6,
60601-1-8 &62366
Certified ku:
CSA STD C22.2 No.60601-1

CHERECHEDZA: Iyo yazvino vhezheni yeiri kushanda bhuku rinogona kutorwa kubva kwedu website pa www.maxtec.com

Zvinyorwa / Zvishandiso

maxtec MaxN2+ [pdf] Mirayiridzo maxtec, MaxN2, R217M65

References

• User Manual