Omada L3 Campus Stackable Managed Switch User Manual

Zviri mukati hide

1 L3 Campus Stackable Managed Switch

2 Zvinotsanangurwa

3 Mirayiridzo Yekushandiswa Kwechigadzirwa

3.1 Chitsauko 2: Kuiswa

3.2 Chitsauko 3: Kubatana

3.3 Chitsauko 4: Kugadzirisa

4 FAQ

4.1 Q: What should I do if the LED indications show an error?

4.2 Zvinyorwa / Zvishandiso

4.2.1 References

L3 Campus Stackable Managed Switch

“

Zvinotsanangurwa

Muenzaniso: Omada Campus Stackable L3 Managed Switch
Front Panel: Mode Selection Button, Management Port, LED,
Console Port USB2.0 Port (Type-C/RJ45), 1G RJ45 Port, 10G SFP+ Slot
LED
Chiratidzo che LED:
- PWR1*: Green On (switch powered by PWR1), Off (PWR2
  disconnected or not working properly)
- PWR2: Green On (switch powered by PWR1 and PWR2 connected),
  Yellow On** (PWR2 powered), Off (PWR1 disconnected or not working
  zvakanaka)
- LED SYS FAN: Green On (all fans work properly), Yellow On (not
  all fans work properly)
- MGMT: On (device linked to port), Flashing (transmitting or
  receiving data), Off (no device linked to port)
- MST: On (device linked to port), Flashing (transmitting or
  receiving data), Off (no device linked to port)

Mirayiridzo Yekushandiswa Kwechigadzirwa

Chitsauko 2: Kuiswa

Usati watanga maitiro ekuisa, ita shuwa kuti une zvese
the necessary tools and follow safety precautions.

Package Zviri mukati: Check all items mentioned in
pasuru.
Kuchengetedza: Follow the guidelines to
chengetedza kuiswa kwakachengeteka.
Zvishandiso zvekuisa: Gather all tools required
yekuisa.
Kuiswa Kwechigadzirwa: Tevera nhanho-ne-nhanho
instructions provided in the manual for successful
kuiswa.

Chitsauko 3: Kubatana

After installation, connect the switch to the network using
appropriate cables and ports as per your network setup.

Chitsauko 4: Kugadzirisa

Configure the switch based on your requirements. You can choose
between Standalone Mode or Controller Mode as per your network
zvinodiwa.

FAQ

Q: What should I do if the LED indications show an error?

A: If the LED indications suggest improper functioning, check
the power sources and connections. Refer to the troubleshooting
chikamu mubhuku rekushandisa kuti uwane rumwe rubatsiro.

View Fullscreen

Bhizinesi Networking Solution
Installation Guide
Omada Campus Stackable L3 Managed Switch

Nezve ino Yekuisa Nhungamiro
Iyi Yekumisikidza Nhungamiro inotsanangura maitiro ehardware, nzira dzekuisa uye mapoinzi anofanirwa kutariswa panguva yekuiswa. Iyi Gaidhi rekuisa rakarongwa sezvizvi: Chitsauko 1 Nhanganyaya Chitsauko ichi chinotsanangura zvikamu zvekunze zve switch. Chitsauko 2 Kuiswa Chitsauko ichi chinotaridza nzira yekuisa switch. Chitsauko 3 Kubatana Chitsauko ichi chinotaridza maitiro ekuita kubatana kweiyo switch. Chitsauko 4 Magadzirirwo Chitsauko ichi chinotaridza magadzirirwo ekuchinja. Appendix A Troubleshooting Appendix B Specifications

Vateereri

Iyi Yekuisa Nhungamiro ndeye:

Network Engineer

Network Administrator

Magungano
· Mamwe mamodheru ari mugwaro rino anogona kunge asiri kuwanikwa munyika yako kana mudunhu. Kuti uwane ruzivo rwekutengesa munharaunda, shanya https://www.omadanetworks.com/.
· Nhamba dziri muChitsauko 2, Chitsauko 3, neChitsauko 4 ndedzezvinangwa zvekuratidzira chete. Chimiro chako chinogona kusiyana kubva pane charatidzwa.
Kuverengera bhajeti rePoE kunoenderana nekuongororwa kwemurabhoritari. Chaiyo PoE simba bhajeti haina kuvimbiswa uye ichasiyana semhedzisiro yevatengi kugumira uye zvakatipoteredza zvinhu.
· Gwaro iri rinoshandisa mafomati chaiwo kuratidza akakosha mameseji. Tafura inotevera inonyora zviziviso zvidhori zvinoshandiswa mukati megwaro iri.

Yeuchidza kuva wakangwarira. Yambiro inoratidza kugona kunogona kukonzera kukuvara kwechigadzirwa.
Yeuchidza kutora chiziviso. Katsamba kane ruzivo runobatsira pakushandisa zvirinani kwechigadzirwa.

Inoenderana Gwaro
Iyo Yekushandisa Yekushandisa uye CLI Reference Guide yechigadzirwa inopihwa paKurodha Center. Kuti uwane ruzivo rwechigadzirwa chazvino, shanyira mukuru webnzvimbo: https://support.omadanetworks.com/document/.

Zviri mukati
Chapter 1 Introduction ———————- 01
1.1 Chigadzirwa Pamusoroview …………………………………………………..01 1.2 Appearance……………………………………………………………..01
Chapter 2 Installation ———————- 12
2.1 Package Contents ………………………………………………….12 2.2 Safety Precautions …………………………………………………12 2.3 Installation Tools……………………………………………………..14 2.4 Product Installation ………………………………………………..14
Chapter 3 Connection ———————- 22
3.1 Ethernet Port …………………………………………………………..22 3.2 10G SFP+/25G SFP28/100G QSFP28 Slot ………..22 3.3 Console Port ……………………………………………………………22 3.4 Verify Installation…………………………………………………….23 3.5 Power On ………………………………………………………………….24 3.6 Initialization………………………………………………………………24 3.7 Stack Topology ……………………………………………………….24
Chitsauko 4 Magadzirirwo ———————– 27
4.1 Kugadzirisa Kupfuuraview…………………………………………27 4.2 Standalone Mode……………………………………………………27 4.3 Controller Mode………………………………………………………28
Appendix A Troubleshooting —————- 32
Appendix B Specifications —————— 33

Omada Campus Stackable L3 Managed Switch

Chitsauko 1 Nhanganyaya

1.1 Chigadzirwa Pamusoroview
Yakagadzirirwa bhizinesi uye campus, Omada Campus Stackable L3 Managed Switch provides wire-speed performance and abundant L2 and L3 management features. It provides a variety of service features and multiple powerful functions with high security. The EIA-standardized framework and smart configuration capacity can provide flexible solutions for a variable scale of networks. Static Routing, RIP, OSPF, BGP, IS-IS, PIM-SM/DM/SSM, and ECMP come with abundant Layer 3 routing protocols that support a scalable network. Physically stacking for builtin redundancy and performance. Redundant power supplies and fans make it an ideal choice for reliable networking architecture. VRRP allows a group of switches to dynamically back up each other. ERPS supports rapid protection and recovery in a ring topology. MACsec, secure boot, ACL, 802.1x and Dynamic ARP Inspection provide robust security strategies. QoS and IGMP snooping/filtering optimize voice and video application. Link aggregation (LACP) increases aggregated bandwidth, optimizing the transport of business critical data. SNMP, RMON, WEB, Netconf and CLI Log-in bring abundant management policies. These switches integrate multiple functions with excellent performance, and is friendly to manage, which can fully meet the need of the users demanding higher networking performance. S6500-24GP4XF/S6500-48GP6XF/S6500-24MPP4Y/S6500-48MPP6Y is also a Power Sourcing Equipment (PSE*). The RJ45 ports that support Power over Ethernet (PoE*) function can automatically detect and supply power to those powered devices (PDs*) complying with IEEE 802.3af, IEEE 802.3at, and IEEE 802.3bt (only for S6500-24MPP4Y/S6500-48MPP6Y). *PSE: a device (switch or hub for instance) that provides power through an Ethernet cable. *PoE: This technology describes a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet. *PD: a device powered by a PSE and thus consumes energy. Exampzvimwe zvinosanganisira magetsi network makamera, wireless LAN access points, IP nhare, network hubs, embedded computers etc.
1.2 Chitarisiko
Front Panel (The figure is for demonstration only. It may differ from your actual product. )
The front panel of S6500-24G4XF is shown as the following figure.
Mode Selection Bhatani
Management Port

LED

Console Port USB2.0 Port (Type-C/RJ45)

1G RJ45 Chiteshi

10G SFP+ Slot LED

The front panel of S6500-48G6XF is shown as the following figure.
Mode Selection Bhatani
Management Port

LED

Console Port USB2.0 Port (Type-C/RJ45)

1G RJ45 Chiteshi

10G SFP+ Slot LED

Nhanganyaya 01

Omada Campus Stackable L3 Managed Switch

Chiratidzo che LED

PWR1*

PWR2

Green On

Off

Green On

Yellow Pa**

Off

Green On

Off

Indication
Iyo switch inofambiswa nePWR1. PWR2 yakabviswa kana kuti inoshanda zvisina kunaka.
Iyo switch inofambiswa nePWR1. PWR1 nePWR2 zvakabatana.
Iyo switch inofambiswa nePWR2. PWR1 yakabviswa kana kuti inoshanda zvisina kunaka.
Switch inodzimwa kana zvese PWR1 nePWR2 kushanda zvisina kunaka.

LED SYS FAN
MGMT
MST
Port 1-24 of S6500-24G4XF/ Port 1-48 of S6500-48G6XF
(When the SPEED LED is on)
Port 1-24 of S6500-24G4XF/ Port 1-48 of S6500-48G6XF
(Kana iyo STK LED iripo)
Port 25-28 of S6500-24G4XF/ Port 49-54 of S6500-48G6XF ***

Indication
Kupenya: Iyo switch inoshanda nemazvo. Kudzima kana Kudzima: Switch inoshanda zvisina kunaka.
Green On: Mafeni ese anoshanda nemazvo. Yellow On: Havasi vese mafani anoshanda nemazvo.
On: A device is linked to the port. Flashing: Transmitting or receiving data. Off: No device is linked to the port.
On: The device functions as the master switch in the stack topology or it works individually. Off: The device functions as the member switch in the stack topology.
Green On: Kumhanya pa1000 Mbps, asi hapana chiitiko. Green Kupenya: Kumhanya pa1000 Mbps uye kutumira kana kugamuchira data. Yellow On: Kumhanya pa10Mbps/100 Mbps, asi hapana chiitiko. Yero Kupenya: Kumhanya pa10Mbps/100 Mbps uye kutumira kana kugamuchira data. Kudzimwa: Hapana chishandiso chakabatana nechiteshi chinoenderana.
Pa: Nhamba yechiteshi inoratidza iyo ID ID mune stack topology.
Green On: Kumhanya pa10 Gbps, asi hapana chiitiko. Green Kupenya: Kumhanya pa10 Gbps uye kutumira kana kugamuchira data. Yellow On: Kumhanya pa1 Gbps, asi hapana chiitiko. Yellow Flashing: Kumhanya pa1 Gbps uye kutumira kana kugamuchira data. Kudzimwa: Hapana chishandiso chakabatana nechiteshi chinoenderana.

*PWR1 is the primary power supply and it takes priority over PWR2. When the device is powered by PWR1, PWR2 will be working in the backup mode.
**Kana zvese PWR1 nePWR2 zvichishanda nemazvo uye switch ichibatidzwa nePWR1, zvinotora masekonzi gumi-10 kuti LED PWR20 (yero) ibude mushure mekunge PWR2 yanamwa.
***All 10 Gbps SFP+ slots can be used as uplink ports or stacking ports. When used as stacking ports, the slots need to run at the highest speed.

02 Sumo

Omada Campus Stackable L3 Managed Switch The front panel of S6500-24GP4XF is shown as the following figure.

Mode Selection Bhatani
Management Port
LED Console Port USB2.0 Port (Type-C/RJ45)

1G RJ45 Chiteshi

10G SFP+ Slot LED

Iyo yekumberi pani yeS6500-48GP6XF inoratidzwa seinotevera nhamba.

Mode Selection Bhatani
Management Port
LED Console Port USB2.0 Port (Type-C/RJ45)

1G RJ45 Chiteshi

10G SFP+ Slot LED

The front panel of S6500-24M4Y is shown as the following figure.

Mode Selection Bhatani
Management Port
LED Console Port USB2.0 Port (Type-C/RJ45)

2.5G RJ45 Chiteshi

25G SFP28 Slot LED

The front panel of S6500-24MPP4Y is shown as the following figure.

Mode Selection Bhatani
Management Port
LED Console Port USB2.0 Port (Type-C/RJ45)

2.5G RJ45 Chiteshi

25G SFP28 Slot LED

Nhanganyaya 03

Omada Campus Stackable L3 Managed Switch The front panel of S6500-48M6Y is shown as the following figure.

Mode Selection Bhatani
Management Port

LED Console Port USB2.0 Port (Type-C/RJ45)

2.5G RJ45 Chiteshi

The front panel of S6500-48MPP6Y is shown as the following figure.

25G SFP28 Slot LED

Mode Selection Bhatani
Management Port
LED Console Port USB2.0 Port (Type-C/RJ45)

2.5G RJ45 Chiteshi

25G SFP28 Slot LED

LED Indication LED
PWR1* PWR2
SYS FAN PoE MAX
(For S6500-24GP4XF, S6500-48GP6XF, S6500-24MPP4Y, S6500-48MPP6Y)
MGMT
MST

04 Sumo

Omada Campus Stackable L3 Managed Switch

LED

Indication

Port 1-24 of S6500-24GP4XF/
Port 1-48 of S6500-48GP6XF
(When the SPEED LED is on)

Green On: Kumhanya pa1000 Mbps, asi hapana chiitiko. Green Kupenya: Kumhanya pa1000 Mbps uye kutumira kana kugamuchira data. Yellow On: Kumhanya pa10Mbps/100 Mbps, asi hapana chiitiko. Yero Kupenya: Kumhanya pa10Mbps/100 Mbps uye kutumira kana kugamuchira data. Kudzimwa: Hapana chishandiso chakabatana nechiteshi chinoenderana.

Port 1-24 of S6500-24M4Y & S6500-24MPP4Y/
Port 1-48 of S6500-48M6Y & S6500-48MPP6Y
(When the SPEED LED is on)

Green On: Running at 2.5 Gbps, but no activity. Green Flashing: Running at 2.5 Gbps and transmitting or receiving data. Yellow On: Running at 10 Mbps/100 Mbps/1000 Mbps, but no activity. Yellow Flashing: Running at 10 Mbps/100 Mbps/1000 Mbps and transmitting or receiving data. Off: No device is linked to the corresponding port.

Port 1-24 of S6500-24GP4XF, S6500-24M4Y &
S6500-24MPP4Y/
Port 1-48 of S6500-48GP6XF, S6500-48M6Y &
S6500-48MPP6Y
(Kana iyo STK LED iripo)

Pa: Nhamba yechiteshi inoratidza iyo ID ID mune stack topology.

Port 1-24 of S6500-24GP4XF & S6500-24MPP4Y/
Port 1-48 of S6500-48GP6XF & S6500-48MPP6Y
(Kana iyo PoE LED iripo)

Green On: The port is supplying power normally. Green Flashing: The supply power exceeds the correponding port’s maximum power. Yellow On: Overload or short circuit is detected. Off: Not providing PoE power on the port

Port 25-28 of S6500-24GP4XF/ Port 49-54 of S6500-48GP6XF ***

Green On: Kumhanya pa10 Gbps, asi hapana chiitiko. Green Kupenya: Kumhanya pa10 Gbps uye kutumira kana kugamuchira data. Yellow On: Kumhanya pa1 Gbps, asi hapana chiitiko. Yellow Flashing: Kumhanya pa1 Gbps uye kutumira kana kugamuchira data. Kudzimwa: Hapana chishandiso chakabatana nechiteshi chinoenderana.

Port 25-28 of S6500-24M4Y & S6500-24MPP4Y/
Port 49-54 of S6500-48M6Y & S6500-48MPP6Y***

Green On: Running at 25 Gbps, but no activity. Green Flashing: Running at 25 Gbps and transmitting or receiving data. Yellow On: Running at 1 Gbps/10 Gbps, but no activity. Yellow Flashing: Running at 1 Gbps/10 Gbps and transmitting or receiving data. Off: No device is linked to the corresponding port.

*By default, S6500-24GP4XF is shipped with a PSM500-AC power supply module, S6500-24M4Y/S650048M6Y is shipped with a PSM550-AC power supply module, and S6500-48GP6XF/S6500-24MPP4Y/ S6500-48MPP6Y is shipped with a PSM900-AC power supply module. One more power supply module needs to be purchased separately.
**By default, both PWR1 and PWR2 will work simultaneously in the load sharing mode. They can also work simultaneously in the redundant power supply mode: for S6500-24GP4XF/S6500-48GP6XF/S650024MPP4Y/S6500-48MPP6Y, you can specify the primary power supply and the backup power supply according to your needs; for S6500-24M4Y/S6500-48M6Y, you can only set PWR1 as the primary power supply and PWR2 as the backup power supply. Generally, the primary power supply takes priority over the backup power supply.
***All 10 Gbps SFP+ slots and 25 Gbps SFP28 slots can be used as uplink ports or stacking ports. When used as stacking ports, the slots need to run at the highest speed.

Nhanganyaya 05

Omada Campus Stackable L3 Managed Switch The front panel of S7500-26XF6Y is shown as the following figure.
Management Port

LED

Console Port USB3.0 Port

(RJ45/Type-C)

Mode Selection

Bhatani

10G SFP+ Slot (Port 1-26)

The front panel of S7500-48XF4C is shown as the following figure.

LED 25G SFP28 Slot (Port 27-32)

Mode Selection Bhatani
Management Port
LED Console Port USB3.0 Port (Type-C/RJ45)

10G SFP+ Slot (Port 1-48)

The front panel of S7500-24Y4C is shown as the following figure.

100G QSFP28 Slot LED (Port 49-52)

Management Port

LED

USB3.0 Chiteshi

Console Port

(RJ45/Type-C)

Mode Selection Bhatani

25G SFP28 Slot

LED

(Chiteshi 1-24)

The front panel of S7500-48Y8C is shown as the following figure.

100G QSFP28 Slot (Port 25-28)

LED Mode Selection Button

25G SFP28 Slot (Port 1-48)

06 Sumo

100G QSFP28 Slot (Port 49-56)

Omada Campus Stackable L3 Managed Switch The front panel of S7500-32C is shown as the following figure.

Mode Selection Bhatani
Management Port LED
USB3.0 Chiteshi

Console Port (Type-C/RJ45)

100G QSFP28 Slot

LED

Note: S7500-24Y4C and S7500-48Y8C are designed for installation in Network Telecommunications Facilities (NTFs) where ambient temperature and humidity are controlled.

LED Indication LED
PWR1* PWR2
SYS FAN
MGMT
MST
Port 1-26 of S7500-26XF6Y/ Port 1-48 of S7500-48XF4C
(Kana iyo SPD LED iripo)
Port 1-24 of S7500-24Y4C/ Port 1-48 of S7500-48Y8C
(When the SPD/SPEED LED is on)

Indication
Green On: The power supply works properly. Green Flashing: The power supply module is not plugged in properly or not compatible with the switch. Yellow On: The power supply works properly but the switch is powered by the other power supply.** Yellow Flashing: The power supply module is plugged in properly but there’s is no AC power input; abnormal power supply. Off: No power supply module is inserted.
Kupenya: Iyo switch inoshanda nemazvo. Kudzima kana Kudzima: Switch inoshanda zvisina kunaka.
Green: Mafeni ese anoshanda nemazvo. Yellow: Havasi vese mafani anoshanda nemazvo.
On: A device is linked to the port. Flashing: Transmitting or receiving data. Off: No device is linked to the port.
Cherechedza:
For S7500-48Y8C, this LED lights green at 1 Gbps and orange at sub-1 Gbps.
On: The device functions as the master switch in the stack topology or it works individually. Off: The device functions as the member switch in the stack topology.
Green On: Kumhanya pa10 Gbps, asi hapana chiitiko. Green Kupenya: Kumhanya pa10 Gbps uye kutumira kana kugamuchira data. Yellow On: Kumhanya pa1 Gbps, asi hapana chiitiko. Yellow Flashing: Kumhanya pa1 Gbps uye kutumira kana kugamuchira data. Kudzimwa: Hapana chishandiso chakabatana nechiteshi chinoenderana.
Green On: Running at 25 Gbps, but no activity. Green Flashing: Running at 25 Gbps and transmitting or receiving data. Yellow On: Running at 1 Gbps/10 Gbps, but no activity. Yellow Flashing: Running at 1 Gbps/10 Gbps and transmitting or receiving data. Off: No device is linked to the corresponding port.

Nhanganyaya 07

Omada Campus Stackable L3 Managed Switch

LED

Indication

Port 27-32 of S7500-26XF6Y ***
(Kana iyo SPD LED iripo)

Port 49-52 of S7500-48XF4C/
Port 25-28 of S7500-24Y4C/ Port 49-56 of S7500-48Y8C/ Port 1-32 of S7500-32C***
(When the SPD/SPEED LED is on)

Green On: Kumhanya pa100 Gbps, asi hapana chiitiko. Green Kupenya: Kumhanya pa100 Gbps uye kutumira kana kugamuchira data. Yellow On: Kumhanya pa40 Gbps, asi hapana chiitiko. Yellow Flashing: Kumhanya pa40 Gbps uye kutumira kana kugamuchira data. Kudzimwa: Hapana chishandiso chakabatana nechiteshi chinoenderana.
Cherechedza:
For S7500-48XF4C/S7500-48Y8C/S7500-32C, the indication above applies only when the 100 Gbps QSFP28 slots work with common cables. When the slots work with 1-to-4 breakout cables, a single slot is split into four 25 Gbps interfaces. In such scenario, the LED will light green only when all four interfaces are working at 25 Gbps (maximum speed), otherwise it will light yellow. When no device is connected to any of the four interfaces, the LED will be off. (The 100 Gbps QSFP28 slots will support 1-to-4 breakout cables in a future software release.)

Port 1-32 of S7500-26XF6Y/
Port 1-48 of S7500-48XF4C/ Port 1-28 of S7500-24Y4C/ Port 1-56 of S7500-48Y8C
(Kana iyo STK LED iripo)

Pa: Nhamba yechiteshi inoratidza iyo ID ID mune stack topology.

*By default, S7500-26XF6Y/S7500-48XF4C/S7500-24Y4C/S7500-48Y8C/S7500-32C is shipped with a PSM550-AC power supply module installed respectively. One more power supply module needs to be purchased separately. **By default, both PWR1 and PWR2 will work simultaneously in the load sharing mode. They can also work simultaneously in the redundant power supply mode with PWR1 as the primary power supply and PWR2 as the backup power supply. Generally, the primary power supply takes priority over the backup power supply. ***All 25 Gbps SFP28 slots of S7500-26XF6Y and 100 Gbps QSFP28 slots of S7500-48XF4C/S7500-24Y4C/ S7500-48Y8C/S7500-32C can be used as uplink ports or stacking ports. When used as stacking ports, the slots need to run at the highest speed.
Port Introduction (The Management Port, Console Ports, and USB Ports of S7500-48Y8C are located on the rear panel.)
Management Port Designed to connnect the device for management through web, CLI or SNMP. Do not connect this port to any outdoor device, as this may induce surge and lightning damage. Console Port Designed to connect with a computer for monitoring and configuring the switch. When the switch has an RJ45 console port and a Type-C console port, console input is active on only one console port at a time. By default, the Type-C connector takes priority over the RJ45 connector, or you can change the priority through the web. Do not connect this port to any outdoor device, as this may induce surge and lightning damage. USB Port Designed to install the USB flash disk for data storage. 1000M RJ45 Port Designed to connect to the device with a bandwidth of 10Mbps, 100 Mbps or 1000 Mbps. For PoE switches, the port can also provide power for PDs.

08 Sumo

Omada Campus Stackable L3 Managed Switch
2.5G RJ45 Port Designed to connect to the device with a bandwidth of 10 Mbps, 100 Mbps, 1000 Mbps or 2.5 Gbps. For PoE switches, the port can also provide power for PDs. 10G SFP+ Slot Designed to install the 10 Gbps/1 Gbps optical module. 25G SFP28 Slot Designed to install the 25 Gbps/10 Gbps/1 Gbps optical module. 100G QSFP28 Slot Designed to install the 100 Gbps/40 Gbps optical module. Port Feature

Model

1000M

2.5G 10G SFP+ 25G SFP28 100G QSFP28 Management Console USB

RJ45 Port RJ45 Port Slot

Slot

Port

Port Port

S6500-24G4XF

S6500-48G6XF

S6500-24GP4XF

S6500-48GP6XF

S6500-24M4Y

S6500-24MPP4Y

S6500-48M6Y

S6500-48MPP6Y

S7500-26XF6Y

S7500-48XF4C

S7500-24Y4C

S7500-48Y8C

S7500-32C

Rear Panel (The figure is for demonstration only. It may differ from your actual product. )
The rear panel of S6500-24G4XF/S6500-48G6XF is shown as the following figure. The figure is for demonstration purposes only. Your switch may differ in appearance from the depicted.

Kensington Security Slot Grounding Terminal Power Socket

Locking Strap Slot

Cherechedza: PWR1 ndiyo yekutanga magetsi uye inotora pekutanga pane PWR2.

Nhanganyaya 09

Omada Campus Stackable L3 Managed Switch
The rear panel of S6500-24GP4XF/S6500-48GP6XF/S6500-24MPP4Y/S6500-48MPP6Y is shown as the following figure. The figure is for demonstration purposes only. Your switch may differ in appearance from the depicted.

Kensington Security Slot

LED

Nzvimbo Inodzikisira

Power Supply Module

LED

Locking Strap Slot

Note: By default, S6500-24GP4XF is shipped with a PSM500-AC power supply module, and S650048GP6XF/S6500-24MPP4Y/S6500-48MPP6Y is shipped with a PSM900-AC power supply module. One more power supply module needs to be purchased separately. Both PWR 1 and PWR2 can work simultaneously, or you can specify the primary power supply and the backup power supply according to your needs. Generally, the primary power supply takes priority over the backup power supply.
The rear panel of S6500-24M4Y/S6500-48M6Y/S7500-26XF6Y/S7500-48XF4C/S7500-24Y4C is shown as the following figure. The figure is for demonstration purposes only. Your switch may differ in appearance from the depicted.

Nzvimbo Inodzikisira

LED

Power Supply Module Locking Strap Slot

LED

Kensington Security Slot

Iyo yekumashure pani yeS7500-48Y8C inoratidzwa seinotevera nhamba. Nhamba yacho ndeyezvinangwa zvekuratidzira chete. Shanduko yako inogona kusiyana nechitarisiko kubva kune yaratidzwa.

Nzvimbo Inodzikisira

LED

Kukiya Strap

Slot

Power Supply Module

10 Sumo

ManagemeC(nTtoyPnposeor-tCle/RPJoU4rt5S)B3P.o0wPeorrSt upplyLoMcokdiSnulgoletStraLpED

Omada Campus Stackable L3 Managed Switch
Note: By default, the device is shipped with a PSM550-AC power supply module installed. One more power supply module needs to be purchased separately. When the switch has two power supply modules installed, both PWR1 and PWR2 will work simultaneously in the load sharing mode by default. They can also work simultaneously in the redundant power supply mode with PWR1 as the primary power supply and PWR2 as the backup power supply. Generally, the primary power supply takes priority over the backup power supply.
The rear panel of S7500-32C is shown as the following figure. The figure is for demonstration purposes only. Your switch may differ in appearance from the depicted.

Akatungamirira akatungamirira
Locking Strap Slot
Power Supply Module Kensington Security Slot

Nzvimbo Inodzikisira

LED
Locking Strap Slot

Power Supply Module

Note: By default, the device is shipped with a PSM550-AC power supply module installed. One more power supply module needs to be purchased separately. When the switch has two power supply modules installed, both PWR1 and PWR2 will work simultaneously in the load sharing mode by default. They can also work simultaneously in the redundant power supply mode with PWR1 as the primary power supply and PWR2 as the backup power supply. Generally, the primary power supply takes priority over the backup power supply.
Power Supply Module The pluggable power supply module PSM500-AC/PSM900-AC/PSM550-AC is an AC-input power supply module. It can convert the input voltage to 53.5 V (12 V for PSM550-AC) with the maximum output power of 500 W/900 W/550 W respectively. Kensington Security Slot Secure the lock (not provided) into the security slot to prevent the device from being stolen.
Grounding Terminal The switch already comes with lightning protection mechanism. You can also ground the switch through the PE (Protecting Earth) cable of AC cord or with Ground Cable. For detailed lightning protection measures, refer to the Lightning Protection Guide from: https://support.omadanetworks.com/r/1004/. Locking Strap Slot Remove the instruction label and insert the AC power cable locking strap into the slot to secure the power cable.

Nhanganyaya 11

Omada Campus Stackable L3 Managed Switch

Chitsauko 2 Kuiswa

2.1 Package Zviri mukati

Ita shuwa kuti pasuru yacho ine zvinhu zvinotevera. Ndapota taura nemugovera wako, kana chimwe chezvinhu zvakanyorwa chakakuvadzwa kana chisipo. Nhamba dzacho ndedzekuratidzira chete. Zvinhu chaizvo zvinogona kusiyana muchitarisiko uye uwandu kubva pane zviri kuratidzwa.

Switch

Power Cord uye Console Cable

Installation Guide
Bhizinesi Networking Solution
Installation Guide
Omada Campus Stackable L3 Managed Switch

Mabhureki Ekukwirisa, Zvikuru uye Rubber Tsoka

2.2 Chengetedzo Yekuchengetedza
Kuti udzivise chero kukanganisa kwechigadzirwa uye kukuvadzwa kwemuviri kunokonzerwa nekushandiswa kusina kunaka, unofanira kuchengeta mitemo inotevera.
Chengetedzo Yekuchengetedza Chengetedza simba rakadzima panguva yekuisa. Pfeka ESD-yekudzivirira wrist tambo, uye ita shuwa kuti wrist tambo ine ganda rakanaka uye
zvakanaka pasi. Shandisa chete tambo yemagetsi yakapihwa ne switch. Ita shuwa kuti voltage inofananidzira zvakatemwa zvakaratidzwa pane yekumashure yepaneru
chinja. Ita shuwa kuti switch yacho yakaiswa munzvimbo ine mhepo inofefetera uye gomba rayo rekufefetera harisi
yakavharwa. Usavhura kana kubvisa chivharo chekuchinja. Usati wachenesa chigadzirwa, cheka magetsi. Usaichenesa nemucheka wemvura, uye usambofa
use any other liquid cleaning method. Place the device with its bottom surface facing downwards. Only instructed person or skilled person can be allowed to install, replace, or service this device.
Saiti Zvinodiwa
Tembiricha/Humidity

12 Kuiswa

Omada Campus Stackable L3 Managed Switch Keep the equipment room at an appropriate level of temperature and humidity. Too much or too little humidity may lead to bad insulation, leakage of electricity, mechanical property changes, and corrosion. High temperatures may accelerate aging of the insulation materials, significantly shortening the service life of the device. To find out the best temperature and humidity conditions for the device, check the Appendix B Specifications. Clearness
Iyo huruva yakaunganidzwa pane switch inogona kunyudzwa nemagetsi akamira uye zvichikonzera kusabatana kwakashata kwesimbi yekubata mapoinzi. Mamwe matanho akatorwa kuti mudziyo udzivise magetsi akamira, asi akanyanya kusimba magetsi anogona kukonzera kukuvara kunouraya kuzvinhu zvemagetsi pabhodhi redunhu remukati. Kuti udzivise kuita kwemagetsi akamira pakushanda kwe switch, batanidza kukosha kwakawanda kune zvinotevera zvinhu: Dururira mudziyo nguva nenguva, uye chengetedza mweya wemukati wakachena. Chengetedza mudziyo wakadzikama uye ona kuti static magetsi aendeswa. Electromagnetic Interference
Zvinhu zvemagetsi zvinosanganisira capacitance uye inductance pamudziyo zvinogona kukanganiswa nekukanganiswa kwekunze, senge yakaitwa emission necapacitance coupling, inductance coupling, uye impedance coupling. Kuti uderedze zvinokanganisa, ita shuwa kutora matanho anotevera: Shandisa magetsi anogona kunyatso kusefa kukanganisa kubva kune magetsi grid. Chengetedza mudziyo uri kure ne-high-frequency uye yakasimba-ikozvino michina yakadai sekutumira redhiyo
chiteshi. Shandisa electromagnetic shielding kana zvichidikanwa. Mheni Dziviriro
Kuiswa 13

Omada Campus Stackable L3 Managed Switch
Kunyanya high voltage currents inogona kugadzirwa ipapo kana mheni ikaitika uye mhepo iri munzira yekuburitsa magetsi inogona kupiswa ipapo kusvika 20,000 °C. Sezvo ichi chiriporipo ichi chakasimba zvekukuvadza midziyo yemagetsi, matanho ekudzivirira mheni anofanirwa kutorwa. Ita shuwa kuti rack uye mudziyo wakanyatso vhu. Ita shuwa kuti socket yemagetsi inobata zvakanaka pasi. Chengetedza inonzwisisika cabling system uye dzivirira inokonzeresa mheni. Shandisa chiratidzo SPD (Surge Protective Device) paunenge uchiisa waya kunze.
Ongorora: Kuti uwane akadzama ekudzivirira mheni, tarisa kune Mheni Dziviriro Gwaro kubva: https://support.omadanetworks.com/r/1004/. Installation Site
When installing the device on a rack or a flat workbench, attach much importance to the following items: Install the device with its bottom surface facing down only. This equipment is not suitable for use in locations where children are likely to be present. The rack or workbench is flat, stable, and sturdy enough to support the weight of 9.5 kg at least. The rack or workbench has a good ventilation system. The equipment room is well ventilated. The rack is well grounded. Keep the device less than 1.5 meters away from the power socket.
2.3 Kuisa Zvishandiso
Phillips screwdriver ESD-yekudzivirira chiuno chekuputira Tambo
Cherechedza: Zvishandiso izvi hazvina kubatanidzwa nechigadzirwa chedu. Kana zvichidiwa, unogona kuzvitenga zvakasiyana.
2.4 Kuiswa kweChigadzirwa
Switch yakagadzirwa nechemberi-kumashure-kumashure kupisa dissipation feature. Kana ichishanda, mhepo inotenderera sezvinoratidzwa pasi apa. Kuti uwedzere kupisa kupisa, ndapota isa mudziyo wacho munzvimbo ine mhepo inofefetera uye usiye 5 kusvika 10 cm mapeji akatenderedza mudziyo.
14 Kuiswa

Mufananidzo 2-1

Kutenderera Kwemhepo

Omada Campus Stackable L3 Managed Switch

Kuiswa kweDesktop

Kuisa mudziyo padesktop, tevera matanho:
1. Gadza mudziyo panzvimbo yakati sandara iyo yakasimba zvakakwana kuti utsigire huremu hwese hwechigadzirwa nezvose zvinogadzirwa.

2. Bvisa mapepa ekutsigira anonamira kubva patsoka dzerabha.

3. Isa tsoka dzerabha pasi pechigadziro kuti usatsvedza kana waiswa padesktop.

Mufananidzo 2-2

Kuiswa kweDesktop

Tsoka Pazasi peChishandiso Notch

Rack Installation

Iyo package inosanganisira 6 mapeya eakasiyana rack-kukwira mabhureki, iwo mapikicha anoratidzwa pazasi uye anogona kusiyana kubva chaiwo zvigadzirwa.

Mufananidzo 2-3

Mounting Mabhureki

Screw Hole Group 2

Bracket D Bracket C Bracket B Bracket A

Screw Hole Group 1
Screw Hole Group 3

Bracket F

Screw Hole Group 4-2 (for device with 420mm depth)

Screw Hole Group 5

Screw Hole

Boka 4-1

Screw Hole Group 4-3

(for device with 380mm depth)

(for device with

460mm depth)

Bracket E

Kuiswa 15

Omada Campus Stackable L3 Managed Switch

Before installing the device in an EIA standard-sized, 19-inch rack, please check the efficiency of the grounding system and the stability of the rack, then wear an ESD-preventive wrist strap, and make sure that it has good skin contact and is well grounded. Bracket B, C & E have two adjustable ears, please measure the distance between the front-post rack and the rear-post rack, and determine a suitable mounting method from below:

Nzira

Kuratidzira

Front: Bracket A Rear: Bracket D (Screw Hole Group 1) + Bracket B (Ear towards back)

Rack Distance
(For device with a depth of 380mm)

Rack Distance
(For device with a depth of 420mm)

Rack Distance
(For device with a depth of 460mm)

498-640mm 538-680mm 578-720mm

Front: Bracket A Rear: Bracket D (Screw Hole Group 1) + Bracket C (Ear towards back)

477-498mm 517-538mm 557-578mm

Front: Bracket A Rear: Bracket D (Screw Hole Group 2) + Bracket C (Ear towards back)

429-477mm 469-517mm 509-557mm

Front: Bracket A Rear: Bracket D (Screw Hole Group 2) + Bracket C (Ear towards front)

410-429mm 450-469mm 490-509mm

Front: Bracket A Rear: Bracket D (Screw Hole Group 3) + Bracket C (Ear towards back)

357-410mm 397-450mm 437-490mm

Front: Bracket A Rear: Bracket D (Screw Hole Group 2) + Bracket B (Ear towards back)

282-410mm 322-450mm 362-490mm

16 Kuiswa

Omada Campus Stackable L3 Managed Switch

Front: Bracket A Rear: Bracket F (Screw Hole Group 4) + Bracket E (Ear towards back)

555-936mm 555-936mm 555-936mm

Front: Bracket A Rear: Bracket F (Screw Hole Group 5) + Bracket E (Ear towards back)

743-1121mm 743-1121mm 743-1121mm

Kuisa mudziyo, tevera mirairo inotsanangurwa pazasi:

1. Attach the M6 nuts to the racks.

Mufananidzo 2-4

Securing M6 Nuts

×8

2. Attach the mounting brackets (B, C or E) to the rear-post racks and secure them with the provided M6 screws, as illustrated in the following figure.

Mufananidzo 2-5

Installing Brackets on Racks

3. Attach the brackets A & D/F to the switch with the provided M3 screws.

Kuiswa 17

Omada Campus Stackable L3 Managed Switch

Mufananidzo 2-6

Installing Brackets on Switch

4. After the brackets are attached to the device, hold the switch with attached brackets up until it aligns with the brackets on the racks, and gently push the switch backwards until it is in place, then secure the device on the racks with M6 screws and fix brackets B/C or E to brackets D or F with M4 screws on both sides.

Mufananidzo 2-7

Installing Switch on Racks

Caution: Leave 5 to 10 cm gaps around the devices for air circulation. Avoid placing heavy things on the device. Mount devices in the order demonstrated above and ensure a certain clearance between devices for
the purpose of heat dissipation.

18 Kuiswa

Omada Campus Stackable L3 Managed Switch

Power Supply Module Installation

S6500-24GP4XF is shipped with a PSM500-AC power supply module installed, S6500-48GP6XF/ S6500-24MPP4Y/S6500-48MPP6Y is shipped with a PSM900-AC power supply module installed, and S6500-24M4Y/S6500-48M6Y/S7500-26XF6Y/S7500-48XF4C/S7500-24Y4C/S7500-48Y8C/S750032C is shipped with a PSM550-AC power supply module installed. It looks like below, and the image may differ from your actual product.

Mufananidzo 2-8

Appearance of the Power Supply Module

AC Power Cord Connector
FAN

Retainer Clips

Extraction Handle

LED

Locking Strap Slot Release Handle

Kana iwe uchida kuwedzera imwezve magetsi emagetsi module, ndapota tevera matanho:

1. Wear an ESD-preventive wrist strap, and make sure that it has good skin contact and is well grounded.

2. Press the extraction handle of the module with one hand, and hold the bottom of the module using your other hand. Gently push the module in along the slot guide rail.

3. Release the extraction handle to fix the power supply module in place.

Mufananidzo 2-9

Kuisa iyo Power Supply Module

Release Handle

Caution: Do not plug the power cord until the power supply module installation is completed. When installing a power supply module, make sure it is set correctly in the operation of installation. Do not use too much force in the installation. If resistance is encountered or positions of the power
supply module appear larger during installation, you must first remove the module and then reinstall the module. If the Retainer Clips cannot spring up naturally and the power module is blocked, it may be due to the power supply module is not installed properly. Please check carefully.
The power supply module is designed with a locking strap slot. If you need to secure the power cable with the included locking strap, please follow the steps:
1. Wear an ESD-preventive wrist strap, and make sure that it has good skin contact and is well grounded.
Kuiswa 19

Omada Campus Stackable L3 Managed Switch
2. Remove the instruction label on the AC power cable locking strap slot. 3. Attach the clamp to the AC power cable and insert the locking strap into the slot. 4. Adjust tightness and distance of the locking strap using clips to ensure the cable is securely fastened.
Figure 2-10 Installing the Locking Strap

Kana iwe uchida kubvisa iyo magetsi module, ndapota tevera matanho:
1. Wear an ESD-preventive wrist strap, and make sure that it has good skin contact and is well grounded.
2. Depress the retainer clip to release the locking strap, and then remove the power cord from the external power supply system and the power module.
3. Press the extraction handle of the module with one hand, and pull the extraction handle using your other hand, until the module completely comes out of the chassis.
Caution: Unplug the power cord first, then remove the power supply module. When removing a power supply module, make sure that the power supply module is set correctly in the
operation of installation. In order to better protect the power supply module during removal, it is recommended that you
package it in an antistatic bag.
Kuiswa kweFan Module
S6500-24GP4XF/S6500-48GP6XF/S6500-24M4Y/S6500-24MPP4Y/S6500-48M6Y/S650048MPP6Y/S7500-26XF6Y/S7500-48XF4C/S7500-24Y4C/S7500-48Y8C/S7500-32C is shipped with hot-swappable fan modules installed. They look like below, and the images may differ from your actual product.
Mufananidzo 2-11 Kuonekwa kweFan Module
LED

20 Kuiswa

Extraction Handle Retainer Clips Release Handle

Omada Campus Stackable L3 Managed Switch For normal operation of the switch, please ensure that models with 5 fan modules maintain at least 4 operational modules, while models with 4 fan modules maintain at least 3 operational modules. If one fan module is damaged, please replace it as follows: 1. Wear an ESD-preventive wrist strap, and make sure that it has good skin contact and is well
grounded. 2. Press the extraction handle of the module with one hand, and pull the extraction handle until the
module completely comes out of the chassis.
Mufananidzo 2-12 Kubvisa Yakakuvadzwa Fan Module
3. Press the extraction handle of a new fan module with one hand, and hold the bottom of the module using your other hand. Gently push the module in along the slot guide rail.
4. Release the extraction handle to fix the power supply module in place. Caution: S6500-24GP4XF/S6500-48GP6XF/S6500-24M4Y/S6500-24MPP4Y/S6500-48M6Y/S6500-48MPP6Y/ S7500-26XF6Y uses hot-swappable fan modules with a maximum speed of 9,000 RPM. S7500-48XF4C/ S7500-24Y4C/S7500-48Y8C/S7500-32C uses hot-swappable fan modules with a maximum speed of 18,000 RPM. Please do not interchange or mix fan modules between models. Sharp edges on the fan module may cause injury, so please operate with caution. Make sure the damaged fan module is in place before you are going to replace it. DO NOT unplug the damaged fan module until the replacement operation. Do not use too much force in the replacement. If resistance is encountered or positions of the fan module appear larger during installation, you must first remove the module and then reinstall the module. If the Retainer Clips cannot spring up naturally and the power module is blocked, it may be due to the fan module is not installed properly. Please check carefully.
Kuiswa 21

Omada Campus Stackable L3 Managed Switch

Chitsauko 3 Kubatanidza

3.1 Ethernet Port

Unganidza chiteshi cheEthernet che switch kune komputa neRJ45 tambo sezviri kuratidzwa nemufananidzo unotevera.

Mufananidzo 3-1

Kubatanidza iyo RJ45 Port

RJ45 Chiteshi

RJ45 Cable

3.2 10G SFP+/25G SFP28/100G QSFP28 Slot

The following figure demonstrates the connection of 10G SFP+/25G SFP28/100G QSFP28 slot to an optical module

Mufananidzo 3-2

Inserting the Fiber Module

Slot Fiber Module

3.3 Console Port
CLI (Command Line Interface) inoita kuti iwe ugone kubata switch, nekudaro iwe unogona kurodha iyo CLI mushure mekubatanidza maPC kana materminals kune console port pane switch kuburikidza netambo (RJ45 console tambo inopihwa, nepo Type-C tambo isina kupihwa)
Batanidza iyo RJ45 console port yemudziyo nekombuta yako netambo yekonsoni sezvinoratidzwa nhamba inotevera.

22 Kubatana

Mufananidzo 3-3

Kubatanidza iyo Console (RJ45) Port

Omada Campus Stackable L3 Managed Switch

Batanidza Type-C console port yemudziyo nekombuta yako neType-C tambo (isina kupihwa) sezvinoratidzwa nhamba inotevera.

Mufananidzo 3-4

Kubatanidza iyo Console (USB) Port

Note: RJ45 console port and Type-C console port cannot be used concurrently. Type-C Console port takes
priority over the RJ45 console port. The Type-C console port is hot-pluggable while the RJ45 console port is not. Keep the device power
off when plugging the console cable into the RJ45 console port. Do not connect the console port with other ports by RJ45 cable.
3.4 Tarisa Kuisa
Mushure mekupedza kuisirwa, simbisa zvinotevera zvinhu: Panofanira kunge paine 5 kusvika 10 cm yekucheneruka yakatenderedza mudziyo wekupinza mhepo uye ita chokwadi chekuyerera kwemhepo.
zvakakwana. The voltage yemagetsi emagetsi anosangana nezvinodiwa zvekupinza voltage mudziyo. Iyo soketi yemagetsi, mudziyo uye rack zvakadzikwa zvakanaka. Chigadzirwa chacho chakanyatsobatanidzwa kune mamwe maturusi etiweki.
Kubatana 23

Omada Campus Stackable L3 Managed Switch

3.5 Simba On

Batanidza chinobatanidza chikadzi chetambo yemagetsi yakapihwa muchisoketi chemagetsi chemudziyo uye batanidza chinobatanidza chiri positive mudura remagetsi sezvinoratidzwa nemufananidzo unotevera. Ita shuwa kuti voltage yemagetsi emagetsi anosangana nezvinodiwa zvekupinza voltage (100-240 V~ 50/60 Hz).

Mufananidzo 3-5

Kubatanidza kune Power Supply

Note: The figure is to illustrate the application and principle. The provided plug and module in your region
may differ from the figures above. Generally PWR1 takes priority over PWR2.

3.6 Kutanga
Mushure mekushandisa mudziyo, inotanga iyo Simba-Kuzviongorora-Yako. Nhevedzano yemiedzo inomhanya otomatiki kuve nechokwadi chekuti mudziyo unoshanda nemazvo. Pakati peino nguva, zviratidzo zve LED zvichapindura nenzira inotevera:
1. Iyo PWR LED chiratidzo chiratidzo mwenje nguva dzese. Iyo SYS LED uye zviratidziro zve LED zvezviteshi zvese zvinoramba zviripo.
2. Mushure meinenge miniti imwe, SYS LED uye LED zviratidzo zvezviteshi zvose zvichapenya kwekanguva uye zvino kudzima.
3. Masekonzi akati wandei gare gare, iyo SYS LED chiratidzo ichapenya, iyo inomiririra kutanga kwakabudirira.
3.7 Stack Topology
With stackable design, the switches can be stacked into one stack topology for higher reliability, larger bandwidth, and simpler networking. To build the stack topology, you need to prepare 2-12 switches and enough 10G SFP+/25G SFP28/100G QSFP28 modules/cables. For more details, see the table below:

Switch

Inoenderana Model(s)

Quantity

S6500-24G4XF S6500-24G4XF, S6500-48G6XF, S6500-24GP4XF, S6500-48GP6XF S6500-48G6XF S6500-24G4XF, S6500-48G6XF, S6500-24GP4XF, S6500-48GP6XF S6500-24GP4XF S6500-24G4XF, S6500-48G6XF, S6500-24GP4XF, S6500-48GP6XF S6500-48GP6XF S6500-24G4XF, S6500-48G6XF, S6500-24GP4XF, S6500-48GP6XF S6500-24M4Y S6500-24M4Y, S6500-24MPP4Y, S6500-48M6Y, S6500-48MPP6Y S6500-24MPP4Y S6500-24M4Y, S6500-24MPP4Y, S6500-48M6Y, S6500-48MPP6Y

2-12 (max 12 in standalone mode, max 4 in controller mode) 2-12 (max 12 in standalone mode, max 4 in controller mode) 2-12 (max 12 in standalone mode, max 4 in controller mode) 2-12 (max 12 in standalone mode, max 4 in controller mode) 2-12 (max 12 in standalone mode, max 4 in controller mode) 2-12 (max 12 in standalone mode, max 4 in controller mode)

24 Kubatana

Omada Campus Stackable L3 Managed Switch

S6500-48M6Y S6500-24M4Y, S6500-24MPP4Y, S6500-48M6Y, S6500-48MPP6Y

S6500-48MPP6Y S6500-24M4Y, S6500-24MPP4Y, S6500-48M6Y, S6500-48MPP6Y

S7500-26XF6Y S7500-26XF6Y

S7500-48XF4C S7500-48XF4C

S7500-24Y4C S7500-24Y4C

S7500-48Y8C S7500-48Y8C

S7500-32C

Kune matatu akaturikidzana topology zvimiro zveakasiyana mamiriro, ndapota gadzira iyo yakakodzera topology zvinoenderana nezvaunoda:

1. Chain Topology: Chain topology iri nyore uye haidi kubatana kwetambo pakati pekutanga uye yekupedzisira unit. Iyo yakakodzera kune yakareba-kure stacking, asi kuvimbika kwayo kwakaderera.

Mufananidzo 3-6

Sravana Sameeralu Serial 4th Chain Topology

Stacking Port Group 2
Stacking Port Group 1

…

2. Ring Topology: Ring topology ine kuvimbika kwepamusoro kana ichienzaniswa neyetani yepamusoro. Kana imwe yemacheni ari mumhete topology ikadamburwa, iyo ring topology inova cheni yepamusoro, asi iyo yese stack system inogona kuramba ichishanda zvakajairwa. Iyo ring topology inoda kubatana kwetambo pakati peyekutanga neyekupedzisira unit, saka haina kukodzera kureba kureba.

Mufananidzo 3-7

Mhete Yekurira

Stacking Port Group 2

Stacking Port Group 1

…

Kubatana 25

Omada Campus Stackable L3 Managed Switch

3. Nyeredzi Topology: Star topology inobatanidza kushandura kune imwe huru yepakati, saka, inogona kuwedzera zvakanyanya chiyero chekutumira data pakati pekuchinja kwenhengo apo ichipa hutungamiri hwakabatana.

Mufananidzo 3-8

Nyeredzi Topology

Stacking Port Group 2

Stacking Port Group 3

Stacking Port Group 1

…

Note: The stacking port is not allowed to connect to non-stacking port, as it may affect the operation of the
device. Stacking ports with the same group ID are not allowed to connect to stacking ports with different
group IDs, neither to different devices. A stacking port group is a logical port dedicated to stacking and needs to be bound to a stacking port.
A stacking port group can be bound to one or more stacking ports to improve bandwidth and reliability.

26 Kubatana

Omada Campus Stackable L3 Managed Switch

Chitsauko 4 Configuration

4.1 Kugadzirisa Kupfuuraview
Iyo switch inotsigira maviri ekugadzirisa sarudzo:
Standalone Mode: Gadzirisa uye tonga switch chete. Controller Mode: Gadzirisa uye maneja network zvishandiso pakati. Inokurudzirwa mune
mahombe-scale network, ayo ane michina mizhinji yakadai semapoinzi ekupinda, ma switch, uye gedhi.
Cherechedza: Kana shanduko yachinjwa kubva kuStandalone Mode kuenda kuController Mode, zvigadziriso zvekuchinja zvicharasika. Kuti uwane ruzivo, tarisa kune magwaro ane hukama pane yekurodha centre yemukuru wedu webnzvimbo: https://support.omadanetworks.com/product/.

4.2 Yakamira nzira

MuStandalone Mode, shandisa komputa kugadzirisa uye kugadzirisa switch uchishandisa GUI (Graphical User Interface) kana CLI (command-line interface).

Mufananidzo 4-1

Topology yeStandalone Mode

Switch

Kushandisa iyo GUI
1. Kuti uwane iyo manejimendi peji re switch, ita shuwa kuti switch uye komputa zviri mune imwechete subnet. Vhura browser uye nyora switch ye IP kero mumunda wekero, wobva wadzvanya Enter kiyi.
Kana switch ikawana IP kero kubva kuDHCP server (kazhinji gedhi), tsvaga IP kero yekuchinja paDHCP server.
Kana zvisiri, shandisa default IP kero 192.168.0.1 kuvhura iyo switch yeku maneja peji.

2. Kekutanga paunopinda, isa zita rekushandisa uye password kuti uchengetedze zvirinani network yako nemidziyo. Mushure meizvozvo, iyo sisitimu inozokuendesa otomatiki kukudzosera kune yekunongedza interface kuti utende neuyo huchangobva kugadzirwa humbowo.

3. Mushure mekubudirira kwekupinda, iyo huru peji ichaonekwa. Iwe unogona kudzvanya mamamenyu kumusoro kwepamusoro uye kuruboshwe divi kuti umise zvinoenderana mabasa.
Kuti uwane mamwe magadzirirwo, tarisa kuMushandisi Guide uye CLI Guide. Iwo madhairekitori anogona kuwanikwa pane yekurodha centre yemukuru wedu webnzvimbo: https://support.omadanetworks.com/product/.
Uchishandisa CLI Gadzira Telnet kana SSH yekubatanidza kuti uwane switch kuburikidza neCLI.

Kugadzirisa 27

Omada Campus Stackable L3 Managed Switch

Shandisa iyo console port kuti uwane switch. Paunenge uchishandisa iyo console port, tanga iyo yekupedzisira emulation chirongwa (yakadai seHyper Terminal) paPC uye gadzirisa iyo terminal emulation chirongwa sezvinotevera:

Baud Rate 38400 bps

Data Bits 8

Parity Hapana

Misa Bits 1

Flow Control Hapana

Kuti uwane mamwe magadzirirwo, tarisa kuMushandisi Guide uye CLI Guide. Iwo madhairekitori anogona kuwanikwa pane yekurodha centre yemukuru wedu webnzvimbo: https://support.omadanetworks.com/product/.
Note: You may need to change the password the first time you log in, which will better protect your network and devices.

4.3 Controller Modhi
Controller Mode applies to the large scale network with mass devices. All devices can be centrally configured and monitored via Omada Pro Hardware Controller (C5300), Omada Pro Software Controller, or Omada Pro Cloud-Based Controller.
Note: Before the following configurations, make sure the switch can access the internet. When using Omada Pro Hardware/Software/Cloud-based Controller, make sure the switch and the controller are in the same subnet. Typically, the switch obtains IP address from the DHCP server. You can check the switch’s IP address on the DHCP server.

Via Omada Pro Hardware Controller (C5300)

Omada Pro Hardware Controller (C5300) is a good alternative if you have no spare PC to keep running Omada Pro Software Controller in the network. It needs to be purchased additionally. Follow the steps below to configure the Omada Pro Hardware Controller (C5300).

Mufananidzo 4-2

Manage the network via Omada Pro Hardware Controller (C5300)

Gateway Switch

Omada Pro Hardware Controller (C5300) EAP
28 Kugadzirisa

EAP

Clients

Omada Campus Stackable L3 Managed Switch

Note: Before you start, be sure to power up and connect your devices according to the topology figure. A DHCP server (typically a gateway with DHCP function enabled) is required to assign IP addresses to
the EAPs and clients in your local network. Omada Pro Controller must have network access to some Omada campus devices (the gateway,
switch, or APs) in order to find, adopt, and manage them.

1. Tsvaga IP kero yegedhi. Vhura mutsara wekuraira paPC yako uye isa ipconfig. Mune rondedzero yemhedzisiro, tsvaga iyo Default Gateway, iri zvakare IP kero yegedhi.
2. Tanga a web browser uye isa IP kero yegedhi. Pinda mugedhi web peji. Wobva waenda kuNetwork> LAN> DHCP Client List kuti uwane IP kero yemutongi wako zvinoenderana nekero yayo yeMAC.
3. Isa iyo IP kero yemutungamiriri wako mukero bar kuti uvhure yayo web peji.
4. On the Omada Pro Controller’s web peji, tevera wizard kuti upedze kuseta nekukurumidza.
5. Mushure mekugadzirisa nokukurumidza, peji yekupinda inooneka. Isa zita rekushandisa uye pasiwedhi zvawakagadzira wodzvanya Log in. Ipapo unogona kuenderera mberi nekugadzirisa controller.
6. Kana uchida kubata midziyo iri kure, tevera matanho anotevera:
a. Ita shuwa kuti Cloud Access inogoneswa pane yako controller. Nekumisikidza, Cloud Access inogoneswa. Ita shuwa kuti Cloud LED iri kupenya zvishoma nezvishoma.

b. Launch a web bhurawuza uye isa https://omada.tplinkcloud.com mune kero bar. Isa TP-Link ID yako uye password kuti upinde. Dzvanya + Wedzera Controller uye sarudza Hardware Controller kuti uwedzere controller yako. Ipapo iwe unogona kuwedzera kugadzirisa controller.

For more details, refer to the Installation Guide of C5300.

Via Omada Pro Software Controller

Download the Omada Pro Software Controller on a PC with Windows OS or Linux OS. Then run the file and follow the wizard to install the Omada Pro Software Controller. Follow the steps below to configure the Controller.

Mufananidzo 4-3

Tonga network kuburikidza neOmada Pro Software Controller

Gateway

Switch

Controller

Omada Pro Software Controller AP

kumhanya pane iyo PC PC

Clients

Kugadzirisa 29

Omada Campus Stackable L3 Managed Switch

1. Launch the Omada Pro Software Controller on your PC. After the initiation process, the controller automatically opens its web peji. Kana zvisiri, tinya Launch a Browser to Manage Network.
2. On the Omada Pro Controller’s web peji, tevera wizard kuti upedze kuseta nekukurumidza.
3. Mushure mekugadzirisa nokukurumidza, peji yekupinda inooneka. Isa zita rekushandisa uye pasiwedhi zvawakagadzira wodzvanya Log in. Ipapo unogona kuenderera mberi nekugadzirisa controller.
4. Kana uchida kubata midziyo iri kure, tevera matanho anotevera:
a. Make sure that Cloud Access is enabled on your controller and your controller has been bound with your TP-Link ID. On the Omada Pro Controller’s web peji, enda kuZvirongwa> Cloud Access kugonesa Cloud Access uye sunga yako TP-Link ID. Kana iwe wakaigadzira mukukurumidza kuseta, svetuka nhanho iyi.
b. Launch a web bhurawuza uye isa https://omada.tplinkcloud.com mune kero bar. Isa TP-Link ID yako uye password kuti upinde. Rondedzero yezvidzori zvakasungwa neTP-Link ID yako ichaonekwa. Ipapo unogona kudzvanya Launch kuti uwedzere kugadzirisa controller.

Note: To manage your devices, Omada Pro Software Controller needs to keep running on your computer.

Via Omada Pro Cloud-Based Controller

Omada Pro Cloud-Based Controller inzira yakanaka pasina chikonzero chekuisa software controller paPC.

Marezenisi anoda kutengwa zvakare.

Mufananidzo 4-4

Tonga network kuburikidza neOmada Pro Cloud-Based Controller

Omada Cloud

Gateway

Switch

Clients
1. Contact the sales staff to grant the Omada Pro Cloud-Based Controller permission. 2. Launch a web browser and enter https://omada.tplinkcloud.com in the address bar. Log in with
your TP-Link ID.
30 Kugadzirisa

Omada Campus Stackable L3 Managed Switch 3. Click + Add Controller and choose Cloud-Based Controller to add an Omada Pro Controller. Then
you can launch the controller to adopt and manage devices. * Omada App With the Omada app, you can also manage your controller at a local site or a remote site via your mobile device. For the detailed configurations, refer to the User Guide of the controller. The guide can be found on the download center of our official webnzvimbo: https://support.omadanetworks.com/product/.
Kugadzirisa 31

Omada Campus Stackable L3 Managed Switch
Apendikisi A Troubleshooting
Q1. Chii chandingaite kana ndikakanganwa zita rekushandisa uye password yeswitch?
1. Batanidza iyo console port yePC kune console port ye switch uye vhura iyo terminal emulation chirongwa.
2. Kudzima uye tangazve switch. Ita chiito chinoratidzwa neiyo terminal emulation chirongwa kuti usvike iyo bootUtil menyu. Chiito chacho chinosiyana kubva kune chigadzirwa kune chigadzirwa. Zviito zvingangoitika zvakanyorwa pazasi: · Dzvanya kiyi ipi neipi kumisa autoboot. · Dzvanya CTRL-B kuti usvike iyo bootUtil menyu.
3. Iyo bootUtil menyu icharatidzwa. Pinda nhamba 6 kuti usarudze "Password recovery" sarudzo uye isa Y kudzima vese vashandisi nemapassword. Ipapo iwe unogona kuseta zvakare zita rekushandisa uye password.
Q2. Sei iyo PWR LED ichishanda zvisina kujairika? Iyo PWR/Simba LED inofanirwa kuvhenekerwa kana iyo simba system inoshanda zvakajairika. Kana iyo PWR/Power LED yakashanda zvisirizvo, tora matanho anotevera:
1. Ita shuwa kuti tambo yemagetsi yakabatana zvakanaka, uye kubata kwemagetsi kwakajairika. 2. Iva nechokwadi chekuti voltage yemagetsi emagetsi anosangana nezvinodiwa zvekupinza voltage zve
chinja.
Q3. Chii chandinofanira kuita kana ndisingakwanisi kuwana iyo web peji rekutungamira? Edza zvinotevera:
1. Tarisa chiteshi chemwenje che LED pane switch uye ona kuti tambo yeEthernet yakabatana zvakanaka. 2. Edza imwe chiteshi pane switch uye iva nechokwadi chekuti Ethernet tambo yakakodzera uye inoshanda zvakajairika. 3. Simbisa switch uye, mushure mechinguva, ibatise zvakare. 4. Ita shuwa kuti IP kero yePC yako yakaiswa mukati me subnet yekuchinja. 5. Kana iwe uchiri kukwanisa kuwana peji yekugadzirisa, dzorerazve shanduko kune zvigadzirwa zvayo zvefekitari. Zvadaro
iyo IP kero yePC yako inofanira kuiswa se 192.168.0.x (“x” inhamba ipi zvayo kubva pa2 kusvika 254) uye subnet mask se 255.255.255.0.
Q4. Nei iyo terminal emulation chirongwa isiri kuratidza nenzira kwayo? Edza zvinotevera:
1. Iva nechokwadi chokuti simba rekushandisa rakajairika uye tambo yekoni yakanyatsobatanidzwa. 2. Tarisa kana tambo yekoni ndiyo mhando yakakodzera. 3. Ita shuwa kuti maparamita eiyo terminal emulation chirongwa akarurama: gadzirisa Bits pasekondi
se38400, Data bits se8, Parity seHapana, Stop bits se1, uye Flow control seHapana.
32 Mashoko Okuwedzera A Kugadzirisa Matambudziko

Omada Campus Stackable L3 Managed Switch

Mashoko Okuwedzera B

Specifications for S6500 Series Switches

Item

Content

IEEE 802.3, IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ae, IEEE 802.3x

Mitemo

IEEE 802.3af/at (For S6500-24GP4XF, S6500-48GP6XF) IEEE 802.3af/at/bt (For S6500-24MPP4Y, S6500-48MPP6Y)

IEEE 802.3bz, IEEE 802.3by, IEEE 802.3cc (For S6500-24M4Y, S6500-24MPP4Y, S6500-48M6Y, S6500-48MPP6Y)

10BASE-T: 2-pair UTP/STP of Cat. 3,4,5 (maximum 100 m) 100BASE-TX: 2-pair UTP/STP of Cat. 5 or above (maximum 100 m) 1000BASE-T: 4-pair UTP/STP of Cat. 5e or above (maximum 100 m) 2.5GBASE-T: 4-pair UTP/STP of Cat. 5e or above (maximum 100 m) Transmission Medium 1000BASE-SX/LX/LX10/BX10: MMF, SMF 10GBASE-SR/LR: MMF, SMF 10G SFP+ Direct Attach Cable (SM5220-1M, SM5220-3M) 25GBASE-SR/LR: MMF, SMF (SM6110-SR, SM6110-LR) 25G SFP28 Direct Attach Cable (SM6220-1M)

S6500-24G4XF/S6500-24M4Y: PWR1, PWR2, SYS, FAN, MGMT, MST, SPEED, STK, Port 1-24, Port 25-28 S6500-24GP4XF/S6500-24MPP4Y: PWR1, PWR2, SYS, FAN, PoE Max, MGMT, MST, SPEED, STK, PoE, Port 1-24, Port 25-28 LED S6500-48G6XF/S6500-48M6Y: PWR1, PWR2, SYS, FAN, MGMT, MST, SPEED, STK, Port 1-48, Port 49-54 S6500-48GP6XF/S6500-48MPP6Y: PWR1, PWR2, SYS, FAN, PoE Max, MGMT, MST, SPEED, STK, PoE, Port 1-48, Port 49-54

Appendix B Specifications 33

Omada Campus Stackable L3 Managed Switch

PoE Budget

For S6500-24GP4XF: 402W (with 1*PSM500-AC, by default) 720W (with 1*PSM900-AC) 720W (with 2*PSM500-AC) 720W (with 1*PSM500-AC and 1*PSM900-AC) 720W (with 2*PSM900-AC) For S6500-48GP6XF: 764W (with 1*PSM900-AC, by default) 384W (with 1*PSM500-AC) 812W (with 2*PSM500-AC) 1176W (with 1*PSM500-AC and 1*PSM900-AC) 1440W (with 2*PSM900-AC) For S6500-24MPP4Y: 751W (with 1*PSM900-AC, by default) 378W (with 1*PSM500-AC) 802W (with 2*PSM500-AC) 1168W (with 1*PSM500-AC and 1*PSM900-AC) 1534W (with 2*PSM900-AC) For S6500-48MPP6Y: 701W (with 1*PSM900-AC, by default) 328W (with 1*PSM500-AC) 752W (with 2*PSM500-AC) 1118W (with 1*PSM500-AC and 1*PSM900-AC) 1484W (with 2*PSM900-AC)

Operating Temperature & Altitude

For S6500-24G4XF/S6500-48G6XF/S6500-24M4Y/S6500-48M6Y: -5 °C to 50 °C (23 °F to 122 °F) @ 300 meters -5 °C to 45 °C (23 °F to 113 °F) @ 2,000 meters -5 °C to 40 °C (23 °F to 104 °F) @ 3,000 meters For S6500-24GP4XF/S6500-48GP6XF/S6500-24MPP4Y/S6500-48MPP6Y: -5 °C to 45 °C (23 °F to 113 °F) @ 2,000 meters -5 °C to 40 °C (23 °F to 104 °F) @ 3,000 meters

Kuchengetedza Kupisa -40 °C kusvika 70 °C (-40 °F kusvika 158 °F)

Kushanda Humidity 10% kusvika 90% RH Isinga-condensing

Kuchengetedza Humidity

5% kusvika 90% RH Isinga-condensing

34 Appendix B Specifications

Omada Campus Stackable L3 Managed Switch

Specifications for S7500 Series Switches

Item

Content

Mitemo

IEEE 802.3, IEEE 802.3x IEEE 802.3z, IEEE 802.3ae (For S7500-26XF6Y, S7500-48XF4C, S7500-24Y4C, S7500-48Y8C IEEE 802.3by, IEEE 802.3cc (For S7500-26XF6Y, S7500-24Y4C, S7500-48Y8C) IEEE 802.3 ba, IEEE 802.3bm (For S7500-48XF4C , S7500-24Y4C, S7500-48Y8C, S7500-32C)

1000BASE-SX/LX/LX10/BX10: MMF, SMF 10GBASE-SR/LR: MMF, SMF 10G SFP+ Direct Attach Cable (SM5220-1M, SM5220-3M) 25GBASE-SR/LR: MMF, SMF (SM6110-SR, SM6110-LR) 25G SFP28 Direct Attach Cable (SM6220-1M) 40GBASE-SR4/LR4: MMF, SMF (For S7500-48XF4C, S7500-24Y4C, Transmission Medium S7500-48Y8C, S7500-32C) 40G QSFP+ Direct Attach Cable (For S7500-48XF4C, S7500-24Y4C, S7500-48Y8C, S7500-32C) 100GBASE-SR4/LR4: MMF, SMF (SM9110-SR4 for S7500-48XF4C, S7500-24Y4C, S7500-48Y8C, S7500-32C) 100G QSFP28 Direct Attach Cable (SM9220-1M for S7500-48XF4C, S7500-24Y4C, S7500-48Y8C, S7500-32C)

LED
Operating Temperature & Altitude

S7500-26XF6Y: PWR1, PWR2, SYS, FAN, MGMT, MST, SPD, STK, SFP+, SFP28 S7500-48XF4C: PWR1, PWR2, SYS, FAN, MGMT, MST, SPEED, STK, SFP+, QSFP28 S7500-24Y4C: PWR1, PWR2, SYS, FAN, MGMT, MST, SPD, STK, SFP28, QSFP28 S7500-48Y8C: PWR1, PWR2, SYS, FAN, MGMT, MST, SPEED, STK, SFP28, QSFP28 S7500-32C: PWR1, PWR2, SYS, MGMT, FAN, MST, SPEED, STK, QSFP28 -5 °C to 45 °C (23 °F to 113 °F) @ 300 meters -5 °C to 40 °C (23 °F to 104 °F) @ 2,000 meters -5 °C to 35 °C (23 °F to 95 °F) @ 3,000 meters

Kuchengetedza Kupisa -40 °C kusvika 70 °C (-40 °F kusvika 158 °F)

Kushanda Humidity 10% kusvika 90% RH Isinga-condensing

Kuchengetedza Humidity

5% kusvika 90% RH Isinga-condensing

For S7500-26XF6Y, S7500-48XF4C, and S7500-24Y4C, the maximum operating temperature supported can reach 50 °C (122 °F) @ 300 meters, 45 °C (113 °F) @ 2,000 meters, and 40 °C (104 °F) @ 3,000 meters.
Iyo inotsigirwa yakakwirira inzvimbo yegungwa kusvika ku5000 m. Zvinofanira kucherechedzwa kuti kana kukwirira kuri pamusoro pe2000 m, pamamita makumi maviri nemakumi maviri ega ega ekukwirira, tembiricha yekushanda inodonha ne220 ° C (1 ° F).

Appendix B Specifications 35

Omada Campus Stackable L3 Managed Switch

Zvinotsanangurwa zveMagetsi Supply Modules

PSM500-AC
(For S6500-24GP4XF/ S6500-48GP6XF/ S6500-24MPP4Y/ S6500-48MPP6Y)

PSM900-AC
(For S6500-24GP4XF/ S6500-48GP6XF/ S6500-24MPP4Y/ S6500-48MPP6Y)

PSM550-AC
(For S6500-24M4Y/ S6500-48M6Y/ S7500-26XF6Y/ S7500-48XF4C/ S7500-24Y4C/ S7500-48Y8C/ S7500-32C)

Power Input

100 V240 V~ 50/60 Hz 8A

100-120V (included)~ 50/60Hz 12A (for locations using low voltage, see specifications for specific countries/ regions)
120 (not included)240V~ 50/60Hz 10A (for other locations)

100 V240 V~ 50/60 Hz 7A

Kubuditsa Voltage

Primary: 53.5 VDC Standby: 12 VDC

Primary: 12 VDC Standby: 12 VDC

Output Current

9.35 A (Kunonyanyisa)

16.5 A (Kunonyanyisa)

45 A (Kunonyanyisa)

Output Power

500 W (Yakawanda)

900 W (Yakawanda)

550 W (Yakawanda)

Operating Altitude

For PSM500-AC/PSM900-AC: Sea level to 3000 m For PSM550-AC: Sea level to 5000 m

36 Appendix B Specifications

CE Mark Yambiro
Ichi chigadzirwa chekirasi A. Munzvimbo yepamba, chigadzirwa ichi chinogona kukonzera kukanganiswa kweredhiyo, mune iyo nyaya mushandisi anogona kudikanwa kutora matanho akakwana.
EU Declaration of Conformity
TP-Link pano inozivisa kuti shanduko iri kuenderana nezvinodiwa zvakakosha uye zvimwe zvinoenderana nemirairo 2014/30/EU, 2014/35/EU, 2011/65/EU uye (EU) 2015/863. Yekutanga EU Declaration of Conformity inogona kuwanikwa pa https://www.tp-link.com/en/support/ce/
UK Declaration of Conformity
TP-Link pano inozivisa kuti switch iri kuenderana nezvinodiwa zvakakosha uye zvimwe zvinoenderana neElectromagnetic Compatibility Regulations 2016 uye Electrical Equipment (Safety) Regulations 2016. Yekutanga UK Declaration of Conformity inogona kuwanikwa pa https://www.tp-link.com/support/ukca/
, .
CHENJERERO:
Double pole, neutral fusing. Bvisa mains musati masevhisi.
Safety Information
· Chengetedza mudziyo kure nemvura, moto, hunyoro kana nzvimbo dzinopisa. · Usaedze kupatsanura, kugadzirisa, kana kushandura mudziyo.Kana uchida sevhisi, tapota taura nesu. · Isa mudziyo nepasi pasi pasi. · Ipulagi patambo yemagetsi inoshandiswa semudziyo wekubvisa, iyo socket-outlet inofanira kuva
kuwanikwa nyore. · Batanidza chigadzirwa mumadziro emadziro ane earthing connection kuburikidza netambo yemagetsi
or plug. · The socket-outlet shall be installed near the equipment and shall be easily accessible. · The PoE ports shall not be used to charge lithium batteries or devices supplied by lithium
mabhatiri.

· Operating temperature: For S6500-24G4XF/S6500-48G6XF/S6500-24M4Y/S6500-48M6Y/S7500-26XF6Y/ S7500-48XF4C/S7500-24Y4C: -5 °C to 50 °C (23 °F to 122 °F) @ 300 meters -5 °C to 45 °C (23 °F to 113 °F) @ 2,000 meters -5 °C to 40 °C (23 °F to 104 °F) @ 3,000 meters For S6500-24GP4XF/S6500-48GP6XF/S6500-24MPP4Y/S6500-48MPP6Y: -5 °C to 45 °C (23 °F to 113 °F) @ 2,000 meters -5 °C to 40 °C (23 °F to 104 °F) @ 3,000 meters S7500-48Y8C/S7500-32C: -5 °C to 45 °C (23 °F to 113 °F) @ 300 meters -5 °C to 40 °C (23 °F to 104 °F) @ 2,000 meters -5 °C to 35 °C (23 °F to 95 °F) @ 3,000 meters
· : S6500-24G4XF/S6500-48G6XF/S6500-24M4Y/S6500-48M6Y/S7500-26XF6Y/S7500-48XF4C/ S7500-24Y4C -5°C 50°C23°F 122°F@ 300 -5°C 45°C23°F 113°F@ 2,000 -5°C 40°C23°F 104°F@ 3,000 S6500-24GP4XF/S6500-48GP6XF/S6500-24MPP4Y/S6500-48MPP6Y -5°C 45°C23°F 113°F@ 2,000 -5°C 40°C23°F 104°F@ 3,000 S7500-48Y8C/S7500-32C -5°C 45°C23°F 113°F@ 300 -5°C 40°C23°F 104°F@ 2,000 -5°C 35°C23°F 95°F@ 3,000
This equipment is not suitable for use in locations
where children are likely to be present.

Ndokumbira uverenge uye uteedzere ruzivo rwekuchengetedza pamusoro apa paunenge uchishandisa mudziyo. Hatigone kuvimbisa kuti hapana tsaona kana kukuvadzwa kuchaitika nekuda kwekushandisa zvisina kunaka kwemudziyo. Ndapota shandisa chigadzirwa ichi nekuchenjerera uye shandisa panjodzi yako.

Kuti uwane rutsigiro rwehunyanzvi, madhairekitori evashandisi uye rumwe ruzivo, ndapota shanya https://support.omadanetworks.com/, kana kungotarisa QR kodhi.
© 2026 TP-Unganidzo 7100002759 REV2.0.1

Zvinyorwa / Zvishandiso

Omada L3 Campus Stackable Managed Switch [pdf] User Manual
L3 Campus Stackable Managed Switch, L3, Campus Stackable Managed Switch, Stackable Managed Switch, Managed Switch, Switch

References

User Manual

L3 Campus Stackable Managed Switch

Zvinotsanangurwa

Mirayiridzo Yekushandiswa Kwechigadzirwa

Chitsauko 2: Kuiswa

Chitsauko 3: Kubatana

Chitsauko 4: Kugadzirisa

FAQ

Q: What should I do if the LED indications show an error?

Zvinyorwa / Zvishandiso

References

Siya mhinduro

Kanzura mhinduro