SMARTRISE C4 Link 2 Programmer

Overview

Gwaro iri rinopa nhanho-ne-nhanho mirairo yekurodha, kuisa, uye kushandisa iyo Link2 Programmer ine C4 controllers. Inotsanangura nzira yekuisa software paC4 controller uchishandisa Link2 Programmer.

Required Tools for Software Programming

Zvishandiso zvinotevera zvinodiwa kuronga software:

1.  Laptop ine Windows-based operating system.
2. Iyo Link2 Programmer.
3. Controller software: The original controller software is stored on a flash drive inside the white job binder. If the flash drive is missing or contains outdated prints and software, Smartrise can provide a weblink yekuwana yazvino software nemaprints.

Application Download Instructions

Kurodha software paSmartrise controller, iyo programming application inofanirwa kudhaunirodwa kune laptop. Ichi chishandiso chinowanikwa pane flash drive. Tevedza nhanho idzi kurodha C4 Link2 Programmer application:

1. Vhura flash drive.
2. Navigate to (5) – Smartrise Programs and open the folder
3. Tsvaga uye vhura iyo C4 Programmer folda.
4. Download and run both applications on the laptop. Some laptops may have firewalls that prevent applications from downloading. For assistance, contact the system administrator.
5. Once completed, the two applications should appear on the desktop.
   NOTE: MCUXpresso does not need to be opened, only installed on the laptop.

Software Loading Instructions

Kuti ive nechokwadi chekushanda kwakaringana, iyo controller software inofanirwa kurodha paSmartrise controller uchishandisa Link2 Programmer. Tevera matanho ari pasi apa kuti upedze hurongwa:

1. Connect the Link2 Programmer to the laptop via the USB port.
2. Open the C4 Link2 Programmer by double-clicking its icon. The application will automatically update to the latest version if connected to the internet. Ensure the application is up to date before proceeding.
3. Bhurawuza iyo controller software:
   1. Open (1) – Controller Software.
   2. Sarudza folda ine zita rebasa.
   3. Sarudza Mota yekurodha software.
   4. Dzvanya Sarudza Folder pazasi pehwindo.
   5. Select the processor to update using the dropdown menu. Processors can be updated in any order:
      • MR A: MR MCUA
      • MR B: MR MCUB
      • SRU A: CT uye COP MCUA
      • SRU B: CT uye COP MCUB
      • Riser/Kuwedzera: Riser/Expansion board

Ma processor akabatanidzwa anogona kuwanikwa pabhodhi.

Start the software loading process by clicking the Start button.

Zvakakosha: Paunenge uchigadzira MR SRU, dzimwe mota dziri muboka dzinogona kukanganiswa. Kuti udzivise izvi, bvisa materminals eboka pabhodhi.

A new window will appear, and the software download will begin. Once complete, a confirmation message will be displayed.

CHERECHEDZA: Kana software ikatadza kurodha, edza zvinotevera:

1. Retry the process.
2. Shandisa imwe USB port yakasiyana.
3. Power cycle the controller.
4. Ensure the Link2 Programmer is properly connected.
5. Tangazve laptop.
6. Try a different Link2 Programmer.
7. Use a different laptop.
8. Contact Smartrise for assistance.

• Click Edit to continue loading software for the remaining processors and follow the previous steps.
• Once all software uploads are complete, reconnect the group terminals and power cycle the controller.
• Verify the software version under Main Menu | About | Vers.
• Bhura pasi ku view sarudzo dzese uye simbisa iyo inotarisirwa vhezheni inoratidzwa.

FAQ

Mubvunzo: Chii chandinofanira kuita kana ndikasangana nezvikanganiso panguva yekurodha software?

A: If you encounter errors during software loading, ensure that all connections are secure and try restarting the process. If issues persist, contact Smartrise support for assistance.

Zvinyorwa / Zvishandiso

SMARTRISE C4 Link 2 Programmer [pdf] Mirayiridzo C4 Link 2 Programmer, C4, Link 2 Programmer, Programmer

References

• User Manual