Solutions MS-TP Programmable Touch Panel
Copyright Notice
Zvese zviri mugwaro rino, zvine kodzero yekambani yedu hazvigone kuumbwa, kukopwa kana kuturikirwa pasina mvumo yekambani.
Madirwo echigadzirwa uye ruzivo zvakataurwa mugwaro rino ndezvekutarisa chete. Tinogona kuchinja, kudzima, kana kugadzirisa chero zvirimo chero nguva uye pasina chiziviso.
FCC Chiziviso
Ichi chigadzirwa chinoenderana neChikamu 15 cheFCC Mitemo. Kuvhiya kunoenderana nemamiriro maviri anotevera:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, includ- ing interference that may cause undesired operation.delete, or update any content at any time and without prior notice.
Ichi chigadzirwa chakaedzwa uye chikawanikwa chinoenderana nemiganhu yeKirasi A yedhijitari mudziyo, zvichienderana neChikamu 15 cheFCC Mitemo. Iyi miganho yakagadzirirwa kupa dziviriro inonzwisisika kubva mukukanganisa kunokuvadza mukuiswa kwekugara. Mudziyo uyu unogadzira mashandisirwo uye unogona kuvheneka redhiyo frequency simba uye, kana isina kuiswa uye kushandiswa zvinoenderana nemirairo, inogona kukonzera kukanganisa kunokanganisa kufambiswa kweredhiyo. Nekudaro, hapana vimbiso yekuti kukanganisa hakuzoitika mune imwe yekumisikidza. Kana chishandiso ichi chikakonzera kukanganisa kunokanganisa redhiyo kana terevhizheni, iyo inogona kutariswa nekudzima mudziyo nekubatidza, mushandisi anokurudzirwa kuyedza kugadzirisa kukanganiswa neimwe kana anopfuura eanotevera matanho:
- Reorrent kana kutamisa antenna inogamuchira.
- Wedzera kupatsanurwa pakati pemidziyo nemugamuchiri.
- Batanidza midziyo mune yekubuda padunhu rakasiyana neiyo iyo inotambirwa yakabatana.
- Bvunza mutengesi kana nyanzvi yeredhiyo/terevhizheni ane ruzivo kuti ubatsirwe.
Kirasi A ITE
Kirasi A ITE chikamu chezvimwe zvese ITE inogutsa kirasi A ITE miganho asi kwete yekirasi B ITE miganho. Midziyo yakadaro haifanirwe kurambidzwa mukutengeswa kwayo asi yambiro inotevera ichaverengerwa mumirayiridzo yekushandisa:
Yambiro
Kushandisa mudziyo uyu munzvimbo yekugara kunogona kukonzera kukanganiswa kweredhiyo.
EC Compliance Statement
(Kirasi A)
Ichi chigadzirwa chinosimbiswa kuti chinoenderana nezvinodiwa zvakanyorwa muKanzuru Direkisheni paKuyerekana kwemitemo yeNyika dzeNhengo ine chekuita neElectromagnetic Compatibility Directive 2014/30/EU.
Surge Protection
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of
your equipment..
Kuchenjerera
The network cable connection method required for this product is direct connection. Please do not cross-connect.
Nhanganyaya
The MS-TP programmable touch panel, designed for automated office systems, multimedia rooms, and smart homes, features a configurable interactive user interface and intelligent networking capabilities. This wall-mounted panel, compatible with standard 86-box installations, includes a 720×720 capacitive touchscreen and one RS-232 serial port. It supports diverse applications across industries, including multimedia conference rooms, multi-functional halls, training centers, showrooms, broadcasting studios, and industrial automation.
Key Features
- ARM Cortex-A55 architecture 1.8Ghz
- Android 11.0 system, 4GB DDR4 RAM, 32GB EMMC Flash
- 4 inch 720*720 (1:1) resolution, capacitive touch screen, standard 86 box wall-in design
- Dual-mode operation – functions as either a touchscreen central control or a user terminal.
- Customizable interface and function configuration through PC software
- Inoenderana neindasitiri yakajairwa network kutaurirana mapuroteni (TCP/IP, Http, UDP, Websocket)
- Standard 1Gbps network port
- Dual power supply mode, supporting POE or an independent DC power supply
Package Zviri mukati
- A1x Programmable Touch Panel (Wall-in)
- 1x 3pin-3.81mm Phoenix Connectors (male)
- 1x 24V/1A Multinational Power Supply (2pin-3.81mm Phoenix Connector)
- 1x Rusvingo Inokwidza Bracket
- 2x Bracket Fixing Screw
- 1x Chinyorwa cheMushandisi
Zvinotsanangurwa
| Technical | |
| CPU: | ARM Cortex-A55 1.8GHz |
| Operating system: | Android 11 |
| RAM: | 4GB DDR4 RAM |
| Flash memory: | 32GB EMMC Flash |
| Resolution: | 720*720 |
| Mhando yekubata: | Inogona Kubata Screen |
| ESD kudzivirira: | IEC 61000-4-2: ± 8kV (Air-gap discharge) & ± 4kV (Contact discharge) |
| Connection | |
| RS232: | 1x 3-pini Phoenix Connectors |
| LAN/POE: | 1x Standard 10M/100M/1000M Ethernet RJ45 chiteshi, inotsigira POE basa |
| SIMBA: | 1x 2-pin Phoenix Connectors, for power supply or POE |
| DEBUG: | 1x Micro USB, system debugging port |
| Mechanical | |
| Dzimba: | Front Pane: Touch Screen; Frame: A uminum A oy Rear Case: P astic |
| Ruvara: | Front Pane: Back; Frame: Gray Rear Case: White |
| Dimensions: | 86mm (L) x 86mm (W) x 44mm (D) |
| Kurema | 192g |
| Magetsi: | 24V DC/1A kana POE |
| Simba rekushandisa: | 5W |
| Kushanda tembiricha: | 0°C ~ 40°C / 32°F ~ 104°F |
| Tembiricha yekuchengeta: | -4 ° F ~ 140 ° F / -20 ° C ~ 60 ° C |
| Kushanda humidity: | 20% ~ 80% (hunyoro hunyoro, husingadziviriri) |
| Kuchengetedza humidity: | 10% ~ 90% (hunyoro hunyoro, husingadziviriri) |
Operation Controls uye Mabasa
| Number | Zita | Tsanangudzo Yebasa |
| 1 | Bata skrini | Capacitive touch screen. The user contro interface can be configured through the configuration too . |
|
2 |
RESET bhatani |
Reboot: After the device boots up, press and ho d the RESET button for more than 1s
less than 5s, then release it, the device wi reboot. The device won’t upload the user projects after rebooting. Reset: After the device boots up, press and ho d the RESET button for more than 5 seconds, then release it, the device writes the user configuration information. The IP wi be restored to the default settings (IP address: 192.168.0.101, subnet mask: 255.255.0.0), the ogin password of the management page wi be initialized to “admin”, the device time wi be initialized to automatic acquisition mode, but user projects won’t be deleted by factory initialization. |
| 3 | POWER bhatani | Inoshandiswa kudzima skrini kana kumuka. |
| 4 | USB port | Micro USB port. The reserved port for system debugging. |
|
5 |
LAN/PoE port |
Standard 10M/100M/1000M Ethernet RJ45 port with default auto-negotiated speed for device connection, projects uploading & down oading, network communication and debugging. By default, the DHCP function of the contro pane is disabled, and the IP setting is as follows: IP address: 192.168.0.101, subnet mask: 255.255.0.0 |
| 6 | SIMBA chiteshi | The power input port (2-PIN phoenix connectors), used for connecting with externa 24V DC power supply. |
|
7 |
RS232 chiteshi |
Programmable RS232 seria port, which is a 3-pin phoenix connector (ma e), compliant with RS232 communication protocol. The pin-outs of the RS232 port are PIN1 for TX, PIN2 for GND, and PIN3 for RX. |
Mounting Instructions
This wall-in touch panel can be mounted on a standard 86 wall box, the mounting steps are as follows:
Danho 1: Install the included wall mounting bracket onto the 86 wall box and fasten it with 2 screws.
Danho 2: Align the back of the touch panel with the slots of the wall bracket and push it in. Press the aluminum edge of the touch panel to ensure that the buckles are in place, and the installation is complete.
To remove the mounted touch panel, insert a screwdriver into the two holes indicated by the arrows and pry the machine out of the bottom box.
FAQ
Q: Can I use this touch panel without surge protection?
A: While surge protection is highly recommended, the touch panel can function without it. However, using surge protection will extend the equipment's lifespan.
Q: What type of network connection is required for this product?
A: The product requires a direct network cable connection method. Do not cross-connect the network cables.
Zvinyorwa / Zvishandiso
 |
Solutions MS-TP Programmable Touch Panel [pdf] Bhuku reMushandisi MS-TP Programmable Touch Panel, MS-TP, Programmable Touch Panel, Touch Panel, Panel |