synapse DIM10-087-06-A Embedded Controller

YAMBIRO UYE CHENJERERO:

•  KUDZVISA MOTO, KUDIKISA, KANA RUFU: DZIMA SIMBA PARUDZISO RINOPARATSA KANA FUSE UYE EDZA SIMBA IRO RAKADZIMWA USATI SIMISA!
• KUGARA KWAKAKODZERA KUNODIWA KUNzvengesa STATIC DISCHARGE IYO INOGONA KUkuvadza VANODZORA PAKATI PAKUGADZIRA .
•  Kana usina chokwadi nezve chero chikamu chemirairo iyi, bvunza nyanzvi yemagetsi; basa rose rinofanira kuitwa nevashandi vanokwanisa.
• Bvisa magetsi pacircuit breaker kana fuse paunenge uchisevhisi, kuisa kana kubvisa fixture kana kuchinja lamps.

SECIFICATIONS

•  Dim Control Max Mutoro: 30 mA Source / Sink
•  Radio Frequency: 2.4 GHz (IEEE 802.15.4)
• RF Transmission Output Power: +20dBM
•  Kushanda Tembiricha: -40 kusvika +85 C
•  Kushanda Humidity: 10 kusvika 90%, isina-condensing
•  Vatyairi: Yakaganhurirwa kune 4 madhiraivha e LED
• Wire Size: 20 AWG, 7” Waya, 600V
•  Zviyero: 3.05” L x 2.21” W x .47” H (77.6 x 56.1 x 11.8 mm)

KUCHENJERA
DIM10-087-06-A controllers anofanirwa kuiswa zvinoenderana nenyika, nyika, uye yemunharaunda magetsi makodhi uye zvinodiwa.

GADZIRA ZVOKUFUNGA
Pazasi pane mamwe kurudziro yekubudirira dimming uchishandisa iyo DIM10-087-06-A. Iyo dimming control waya inoratidzwa seDim + uye Dim-. Iwo masaini masaini ane Maximum voltage ye10V DC.

•  Usakuya DIM-waya pasi pechasi; ichi chiratidzo chekudzoka uye chakakosha pakuita dimming.
• Kana zvichibvira, fambisa waya dziri kure nemitsara yeAC.
• Maximum ye4 LED Drivers pamubati, bvunza Synapse Tsigiro kana chiyero chikuru chichidiwa.
•  Usakwira kune heatsink kana kune mutyairi we LED.
• Kana uchiisa iyo DIM10-087-06-A munzvimbo yakavharirwa, kufunga nezvenzvimbo yekunze antenna uye kupindira kunodiwa kuti upe iyo yakanyanya kunaka isina waya yechiratidzo simba. Usati waiisa zvachose, ita shuwa kuti antenna inonongedza kumusoro kana pasi uye haina chero zvinhu zvesimbi mukati me12 in.

Yakakodzera Antenna Installation

ZVINODIWA

•  50 OHM Terminator plug RP-SMA: Chikamu Nhamba 132360RP kubva Amphenol. (Inoshandiswa kwechinguva static kuchengetedza yeantenna yekubatanidza panguva yekuisa uye inogona kushandiswa zvakare)
• Mounting Hardware: (2) #4 uye M3 screws inokurudzirwa
• Antenna Kit: Kuti uwane sarudzo dzeantenna ndapota tarisa kune edu ekupedzisira magwaro ari pane yedu website. www.synapsewireless.com/documentation

INSTALLATION MIrairo

YAMBIRO: KUDZVISA MOTO, KUDIKISA, KANA RUFU: DZIMA SIMBA PAMUNHU WEDURENJI KANA KUTI FUSE UYE ONA KUTI SIMBA RAKADZIMWA USATI WIRING!

KUBATA ANTENNA

1.  Ita shuwa kuti simba radzimwa. Paunenge uchibata tambo yeantenna, nyanzvi inofanirwa kudzika pasi netambo yepasi.
2.  Bvisa chivharo cheguruva rerabha dzvuku, washer, uye nati kubva pane chinongedzo cheantenna.
3. Batanidza iyo 50 OHM Terminator kune iyo RP-SMA bulkhead ruoko rwakasimba.
4. Sarudza yakanakisa nzvimbo yekunze antenna chinzvimbo uye gadzira yekuvhura yekuisa iyo antenna uye bulkhead.Yakakurudzirwa gomba re 1/4-36UNS-2A threaded antenna ine flat
5.  Bvisa iyo 50 OHM Terminator.
6. Dyisa iyo bulkhead kuburikidza nekuvhura mukugadzirisa.
   (Cherechedza: Yakakurudzirwa max ukobvu hwefixture wall ndeye 6mm kana 0.25 inches. Izvi zvinobvumira tambo dzakakwana kunze kwechigadziriso kune yakanaka yekubatanidza antenna.)
7. Isa washer uye nati kumashure pane antenna yekubatanidza uye chengetedza kugadzirisa.
8. Kara paantenna ruoko zvakasimba. Simbisa 1/4 kutendeuka nepeya yetsono mhuno pliers. Usawedzere kuomesa kana pini yeRF mumusoro inoputika, ichigadzira yakashata RF yekubatanidza mhando
   

   KUKWEDZA

9. Isa mutongi panzvimbo yaunoda uye uchengetedze uchishandisa #4 kana M3 saizi screws uchishandisa maburi anokwira ari kumucheto kumashure kweDIM10-087-
   06- A.
   WIRING THE DIM10-087-06-A CONTROLLER
   Cherechedza: Kunze kwekunge zvataurwa, zvinongedzo kune yakajairwa Dim kune Off LED mutyairi uye DALI 2 LED mutyairi akafanana.
10.  Batanidza iyo 5-24V DC Aux inobuda kubva kumutyairi weLED kuenda kune (SIMBA = RED) waya yeDIM10- 087- 06-A.
11. Batanidza (COMMON/DIM- = BLACK) waya yeDIM10-087-06-A kune COMMON/DALI- kana COMMON/DIM- zvichibva pamutyairi weLED waunawo.
    Kubatanidza maSensors
    Cherechedza: Matanho 12-15 ndeyekuwedzera masensa kune DIM10-087-06-A controller; kana usiri kubatanidza masensa svetuka chikamu ichi.
    Kune maviri masensor ekuisa paDIM10-087-06-A akagadzirirwa yakaderera powered (24V DC) mhando sensors.
    •  Iyo (SENSOR A = BLUE) waya inoshandiswa kubatanidza sensor A.
    • Iyo (SENSOR B = ORANGE) waya inoshandiswa kubatanidza sensor B.
12.  Batanidza iyo sensor simba waya kuAUX kunze kweiyo LED mutyairi (iyo LED mutyairi inopa simba sensor).
13. Batanidza iyo sensor Yakajairwa kune COMMON/DALI- kana COMMON/DIM- zvichibva pamutyairi we LED waunawo.
14.  Batanidza sensor CTRL/Control waya kune (SENSOR A = BLUE) waya kana iyo (SENSOR B = ORANGE) waya yeDIM10-87-06-A controller.
15. Kana iwe uri kushandisa inopfuura sensor imwe chete dzokorora kuisirwa sekutsanangurwa pamusoro.
    KUbatanidza DIMMING CIRCUIT
    Cherechedza: Matanho 16-18 ndeyekubatanidza kusvika kune Standard Dim kune Off LED mutyairi; kana uri kushandisa DALI 2 LED mutyairi svetuka kuenda kumatanho 19-21.
16.  Batanidza (DIM+ = PURPLE) waya kubva paDIM10-087-06-A kuenda kuDIM+ waya pamutyairi weLED.
17. Batanidza (COMMON/DIM- = BLACK) waya kubva paDIM10-087-06-A kuenda kuDIM-waya pamutyairi weLED.
18. Cap isina kushandiswa (DALI- = BROWN) uye (DALI+ = YELLOW) waya.
    Cherechedza: Matanho 19-21 ndeyekubatanidza kusvika kune DALI 2 LED mutyairi.
19. Batanidza iyo DIM10-087-06-A (DALI- = BROWN) waya kune iripo (Common/DIM- = BLACK) waya (yakabatana mudanho 11) kune COMMON/DALI- waya pa LED driver.
20. Batanidza (DALI+ = YELLOW) waya kubva paDIM10-087-06-A kuenda kumutyairi we LED DALI+.
21. Bata iyo isina kushandiswa (DIM+ = PURPLE) waya.

KUSIMBISA CHIKAMU NEMUTONGI
Mushure mekubatanidza Controller kuDhivhari ye LED uye chero masensa, ita shuwa yekuvharisa chero waya dzisina kushandiswa. Chinja simba kune chigadziriso. Chiedza chinofanira kubatidzwa. STATUS akatungamirira
Cherechedza: Kana mutongi achiiswa simba mavara anotevera anoratidza mamiriro azvino.

• Tsvuku = Hapana Network Yakawanikwa (Kukurukurirana Yakarasika)
• Blinking Green = Network Yakawanikwa, Controller Haina Kugadziriswa (Chishandiso hachisati chawedzerwa kune SimplySNAP)
•  Green = Network Yakawanikwa, Mudzori Akagadziriswa (Kazhinji Kushanda)

Tarisa kune Simply SNAP's Manual kuti uwane ruzivo rwekupa iyo DIM10-087-06-A.

YAMBIRO:

•  Kana imwechete Synapse controller ichishandiswa kutyaira iyo DIM + yekupinza yeakawanda madhiraivha e LED, saka ese eDIM- mitsara kubva kune vese vatyairi INOFANIRA kusungirirwa zvakananga / kupfupikiswa pamwechete kuti ipe yakajairwa kudzoka / pasi kune controller.
• Synapse haizopa waranti kana kuve nemhosva yezvigadziriso neimwe nzira yemagetsi yekubatanidza DIM- mitsara kubva kune akawanda madhiraivha.

REGULATORY INFORMATION AND CERTIFICATIONS

RF Exposure Statement: Mudziyo uyu unoenderana neFCC radiation exposure miganho yakatemerwa nharaunda isingadzoreki. Mudziyo uyu unofanirwa kuiswa uye kushandirwa nedikidiki chinhambwe che20cm pakati pe radiator nemuviri wako. Iyi transmitter haifanirwe kunge yakabatana kana kushanda pamwe chete nechero imwe antenna kana transmitter.

Industry Canada (IC) zvitupa: Ichi chidzitiro chedhijitari hachipfuure miganho yeKirasi B yekuburitsa ruzha rweredhiyo kubva mumidziyo yedhijitari yakarongwa muRadio Interference Regulations yeCanada Dhipatimendi Rezvekutaurirana.

FCC certification uye ruzivo rwekutonga (USA chete)
FCC Chikamu 15 Kirasi B: Chishandiso ichi chinoenderana nechikamu 15 chemitemo yeFCC. Kushanda kunoenderana nemamiriro maviri anotevera:

1. Iyi michina inogona kusakonzera kukanganisa kunokuvadza, uye
2. Midziyo iyi inofanirwa kugamuchira chero kuvhiringwa kwakagamuchirwa, kusanganisira kukanganisa kunogona kukonzera kukuvadza kushanda.

KUPINDISA RADIO FREQUENCY (RFI) (FCC 15.105): Midziyo iyi yakaedzwa uye yakawanikwa inoenderana nemiganhu yeKirasi B yedhijitari mudziyo, zvichienderana neChikamu 15 chemitemo yeFCC. Iyi miganho yakagadzirirwa kupa dziviriro inonzwisisika kubva mukukanganisa kunokuvadza mukuiswa kwekugara. Midziyo iyi inogadzira, inoshandisa, uye inogona kuvheneka redhiyo frequency simba uye, kana isina kuiswa uye kushandiswa zvinoenderana nemirairo, inogona kukonzera kukanganisa kunokanganisa kufambiswa kweredhiyo. Nekudaro, hapana vimbiso yekuti kukanganisa hakuzoitika mune imwe yekumisikidza. Kana mudziyo uyu ukakonzera kukanganisa kunokuvadza redhiyo kana terevhizheni, iyo inogona kutariswa nekudzima uye nekubatidza mudziyo, mushandisi anokurudzirwa kuyedza kugadzirisa kukanganiswa neimwe kana anopfuura eanotevera matanho:

1. Dzokorora kana kutamisa antenna yekugamuchira;
2. Wedzera kupatsanurwa pakati pemidziyo nemugamuchiri;
3. Batanidza midziyo mune yekubuda padunhu rakasiyana neiyo iyo mugamuchiri akabatana;
4. Bvunza mutengesi kana nyanzvi yeredhiyo/TV ine ruzivo kuti ubatsirwe.

Declaration of Conformity (FCC 96-208 & 95-19)

Synapse Wireless, Inc. inozivisa kuti zita rechigadzirwa "DIM10-087-06-A" rine hukama nechiziviso ichi, rinozadzisa zvinodiwa zvakatsanangurwa neFederal Communications Commission sekutsanangurwa kwazvino mune zvinotevera:

• Chikamu 15, Chikamu B, cheKirasi B michina
•  FCC 96-208 sezvainoshanda kumakomputa emunhu eKirasi B uye maperipheral
•  Ichi chigadzirwa chakaedzwa kuExternal Test Laboratory yakasimbiswa maererano nemitemo yeFCC uye yakawanikwa ichisangana neFCC, Chikamu 15, Emission Limits. Documentation is on file uye inowanikwa kubva kuSynapse Wireless, Inc.

Kana iyo FCC ID yemodule mukati meichi chivharo chakavharika isingaonekwe kana yaiswa mukati meimwe mudziyo, ipapo kunze kwemudziyo wakaisirwa chigadzirwa ichi kunofanirwawo kuratidza label inoreva kune yakavharirwa module FCC ID. Shanduko (FCC 15.21): Shanduko kana gadziridzo kumudziyo uyu usina kutenderwa zvakajeka neSynapse Wireless, Inc., zvinogona kukanganisa masimba emushandisi ekushandisa mudziyo uyu.

ZVIMBO

• Muenzaniso : DIM10-087-06-A
• Iine FCC ID: U9O-SM220
• Ine IC : 7084A-SM220
• UL File Nhamba: E346690

DALI-2 Certified Application Controller
Bata Synapse yeRutsigiro- 877-982-7888

Zvinyorwa / Zvishandiso

synapse DIM10-087-06-A Embedded Controller [pdf] Installation Guide DIM10-087-06-A Embedded Controller, DIM10-087-06-A, Embedded Controller, Controller

References

• User Manual