UBiBOT WS1 Wifi Temperature Sensor

 

Mushandisi gwara

Product Sumo

Iyo sensor, nekuita kwayo kwakagadzikana uye kunzwisiswa kwepamusoro, chinhu chakakosha chekucherechedza nekudzidza chiitiko, kushanduka uye kuvandudzwa kwevhu resaline uye mvura-munyu dynamics. Kuyerwa kwedielectric constant yevhu kunopa tarisiro yakananga uye yakagadzikana yemvura yechokwadi yevhu rakasiyana siyana, pamwe nekuyera kwehuwandu hwehuwandu.tage yekunyorova kwevhu.Shandisa Case Scenarios

The sensor is suitable for soil moisture monitoring, scientific experiments, water-saving irrigation, greenhouses, flowers and vegetables, meadows and pastures, rapid soil measurement, plant cultivation, wastewater treatment, fine agriculture and other occasions.

Features

1. Soil water content, conductivity and temperature in one.
2. Completely sealed, acid and alkali corrosion resistant, can be buried in the soil or directly into the water for long-term dynamic detection.
3. High precision, fast response, good interchangeability, probe insertion design ensures accurate measurement and reliable performance.

Zvigadzirwa Zvinotsanangurwa

Zvinotsanangurwa
Model	UB-SEC-N1
Magetsi	DC 4.5~30V
Max Zvazvino	110mA (@5V)
Measuring Range	EC: 0~20000μS/cm Temperature: -40~80℃ Humidity: 0~100%
Kururama	EC: ±3%FS (0~10000μS/cm), ±5%FS (10000~20000μS/cm) Tembiricha: ±0.5℃ Humidity: ±2% (@0~50%, palm soil+30%+25℃) ; ±3% (@50~100%, palm soil+60%+25℃)
Resolution	EC: 1μS/cm Temperature: 0.1℃ Humidity: 0.1%
Dziviriro level	IP68
Connector	Vadivelu Comedy Audio
Cable Length	3m
Kukurukurirana Protocol	RS485 Modbus RTU Protocol
RS485 Kero	0xD6
Baud Rate	1200 bit/s, 2400 bit/s, 4800 bit/s (default), 9600 bit/s, 19200 bit/s

Wiring Instruction

Measurement Area

Measurement area: Inside a 5cm diameter cylinder of equal height to the probes, centred on the centre of the two probes.

Quick Test Method

Select a suitable measurement site, avoid rocks and ensure that the steel needle does not touch hard objects. Throw away the top layer of soil according to the required measuring depth, keep the original tightness of the soil underneath, and insert the sensor vertically into the soil by holding it tightly. Do not shake the sensor from side to side when inserting it. It is recommended to take several measurements within a small area of one measurement point to find the average value.

Ground Penetration Method

Chera gomba wakamira nechiyero che>20cm. Isa pini ye sensor yakachinjika mumadziro egomba pakadzika wakadzama uye uzadze gomba zvakasimba. Mushure menguva yekudzikamisa, kuyerwa uye kurekodha zvinogona kuitwa mukati memazuva, mwedzi kana kupfuura.

Kukurukurirana protocol

1.  Kukurukurirana basic parameters
   

   Kukurukurirana Basic Parameter
   Coding System	8-bit binary
   Dhata Bit	8 zvishoma
   Parity Kuongorora Bit	hapana
   Mira Zvishoma	1 zvishoma
   Error Checking	CRC Tarisa
   Baud Rate	1200 bit/s, 2400 bit/s, 4800 bit/s (default), 9600 bit/s, 19200 bit/s

2. Data Frame Format
   Iyo Modbus-RTU yekutaurirana protocol inoshandiswa mune inotevera fomati:
   • Yekutanga chimiro ≥ 4 bytes munguva.
   •  Kero yekero: 1 byte, default 0xE1.
   • Basa rekodhi: 1 byte, kutsigira basa kodhi 0x03 (kuverenga chete) uye 0x06 (verenga / nyora).
   • Nzvimbo yedata: N bytes, 16-bit data, high byte inouya kutanga.
   • Kutarisa kukanganisa: 16-bit CRC kodhi.
   • Kupedzisa chimiro ≥ 4 bytes yenguva.
     

     Chikumbiro

     Kero yemuranda

     Basa Code

     Register Kero

     Nhamba yeRejista

     CRC LSB

     CRC MSB

     1 byte

     1 byte

     2 bytes

     2 bytes

     1 byte

     1 byte

     Mhinduro

     Kero yemuranda

     Basa Code

     Nhamba yeBytes

     Zviri mukati 1

     Zviri mukati 1

     …

     Content n

     CRC

     1 byte

     1 byte

     1 byte

     2 bytes

     2 bytes

     …

     2 bytes

     2 bytes
3. Register Kero
   

   Register Kero
   Kero	Content	Register Length	Basa Code	Tsanangudzo yetsanangudzo
   0x0000	Humidity	1	03	Data yese isina kusaina, yakakamurwa negumi
   0x0001	Tembiricha	1	03	Yakasaina nhamba yakazara, yakakamurwa negumi
   0x0002	EC	1	03	Integer
   0x07D0	Kero	1	03/06	1～255
   0x07D1	Baud Rate	1	03/06	0:2400, 1:4800, 2:9600

CHERECHEDZA

1. The probe must be fully inserted into the soil when measuring.
2. Pay attention to the lightning protection when using in the field.
3. Do not violently bend the probe, do not pull the sensor lead wire, do not drop or hit the sensor violently.

Mibvunzo Inowanzo bvunzwa

Mubvunzo: Sensor inofanira kuiswa sei muvhu kuitira kuyerwa kwakaringana?

A: The sensor should be fully inserted into the soil for accurate measurements.

Q: Iyo sensor inogona kushandiswa munzvimbo dzekunze?

A: Yes, the sensor can be used in outdoor environments. However, it is important to pay attention to lightning protection when using it in the field.

Mubvunzo: Ndeipi nzira yekutaurirana inoshandiswa ne sensor?

A: The sensor uses RS485 Modbus RTU Protocol for communication.

Zvinyorwa / Zvishandiso

UBiBOT WS1 Wifi Temperature Sensor [pdf] Bhuku reMushandisi WS1, WS1 Pro, UB-SEC-N1, WS1 Wifi Temperature Sensor, WS1, Wifi Temperature Sensor, Temperature Sensor, Sensor

References

• User Manual