synapse DIM10-087-06 Embedded Controller

YAMBIRO UYE CHENJERERO:

• KUNzvengesa MOTO, KUDYA, KANA RUFU; DZIMA SIMBA PANE CIRCUIT BREAKER KANA FUSE UYEEDZA SIMBA IRE RAKADZIMWA USATI WAISIMA!
• KUGARA KWAKAKODZERA KUNODIWA KUNYORERERA STATIC D ICHARGE IYO INOGONA KUKVARA ZVINOTAURIRA PANGUVA YAKUGADZIRA.
• Kana usina chokwadi nezve chero chikamu chemirairo iyi, bvunza nyanzvi yemagetsi; basa rose rinofanira kuitwa nevashandi vane qualified.
• Bvisa magetsi padunhu breake r kana fuse paunenge uchisevhisi, kuisa, kana kubvisa zvigadziriso kana kuchinja l.amps.

INSTALLATION GUIDE

SECIFICATIONS

• Dim Control Max Mutoro: 10 mA Source / Sink
• Radio Frequency: 2.4 GHz (IEEE 802.15.4)
• RF Transmission Output Power: +20 dBm
• Kushanda Tembiricha: -40°C kusvika +80°C
• Kushanda Humidity: 10 kusvika 90%, isina-condensing
• Max D4i Drivers: Yakaganhurirwa kune 4 D4i madhiraivha e LED
• Zviyero: 2.25”L x 2.0”WX .3”H (57 X 50.8 X 7.6 mm)

Mienzaniso

• DIM10-087-06 (Inoshandisa antenna yekunze)
• DIM10-087-06-F (yemukati antenna)

KUCHENJERA

• DIM10-087-06 ma controller anofanirwa kuiswa zvinoenderana nenyika, nyika, uye yemunharaunda magetsi macode uye zvinodiwa.

GADZIRA ZVOKUFUNGA

• Pazasi pane mamwe kurudziro yekubudirira dimming uchishandisa iyo DIM10-087-06. Iyo dimming control waya inoratidzwa seDim + uye Dim-. Iwo masaini masaini ane Maximum voltage ye10V DC.
• Shandisa akawanda-strand 18 Gauge Wire yekudzivirira ruzha uye kugona kwazvino.
• Usakuya waya inodzima; ichi chiratidzo chekudzoka uye chakakosha pakudzima.
• Kana zvichibvira, fambisa waya dziri kure nemitsara yeAC.
• Shandisa zvinongedzo zvine hukuru hwakakwana.
• Bvisa waya yakawandisa pakati pezvigadziriso; Kureba kwemutsara kuchakonzera voltage kudonha
• Maximum ye4 LED Drivers pamubati, bvunza Synapse Tsigiro kana chiyero chikuru chichidiwa.
• CHERECHEDZA: LED Driver inofanirwa kutsigira DIM kune OFF kushanda.

ZVINODIWA ZVINHU

• FL Insertion Zvakarel: Chikamu Nhamba U.FL-LP-IN kubva kuHirose Electric (yeDIM10-087-06 chete)
• FL Extraction Tool: Chikamu nhamba U.FL-LP-N-2 kubva kuHirose Electric (yeDIM10-087-06 chete)
• FL Connector uye 14mm bulkhead: Tambo ine u.FL yekubatanidza kune imwe mugumo uye yechikadzi 14mm bulkhead yekubatanidza kune imwe mugumo inodiwa kufambisa chiratidzo kubva kuDIM10-087-06 kuburikidza neiyo gadziriso imba kuenda kune yekunze antenna.
• Mounting Hardware: (1) #4 kana M3 screw uye standoff inokurudzirwa
• Antenna Kit: Kuti uwane sarudzo dzeantenna ndapota tarisa kune edu ekupedzisira magwaro ari pane yedu website. www.synapsewireless.com/documentation.

INSTALLATION MIrairo

• YAMBIRO: KUDZVISA MOTO, KUDIKISA, KANA RUFU: DZIMA SIMBA PAMUNHU WEDURENJI KANA KUTI FUSE UYE ONA KUTI SIMBA RAKADZIMWA USATI WIRING!

KUKWEDZA

• Chengetedza ne 1 #4 sikuruu (max diameter ye .312 inches) uye standoff.

1. Mounting Options: Gomo mune ye LED Fixture kana Troffer. Kune DIM10-087-06, antenna yekunze inoshandisa u.FL yekubatanidza inofanira kushandiswa kupa RF yekubatanidza kune SNAP mesh network.
2. lace iyo DIM10-087-06 munzvimbo yaunoda uye ichengetedze uchishandisa #4 saizi screw uye kumira-kure uchishandisa gomba rekukwira riri pakati pebhodhi. Usati waisa zvachose DIM10- 087- 06, ita shuwa kuti antenna haina chero zvinhu mukati me3 mukati memukati kana yekunze antenna.

• Cherechedza: Kana uchiisa iyo DIM10-087-06 mune yakavharirwa, kufunga kwemukati kana yekunze antenna chinzvimbo uye kupindira kunodiwa kuti upe yakanyanya kunaka isina waya yechiratidzo simba.
• Kana uchiisa iyo DIM10-087-06 munzvimbo yakavharirwa, kufunga nezvenzvimbo yekunze antenna uye kupindira kunodiwa kuti upe iyo yakanyanya kunaka isina waya yechiratidzo simba. Usati waiisa zvachose, ita shuwa kuti antenna inonongedza kumusoro kana pasi uye haina chero zvinhu zvesimbi mukati me2 in. yeantenna (Mufananidzo 1).

KUGADZIRA ANTENNA

Kuisa antenna:

1. Ita shuwa kuti magetsi adzimwa.
2. Batanidza iyo u.FL tambo (Mufananidzo 5) kune u.FL terminal (Mufananidzo 4).
3. Shandisa chishandiso chekuisa, PN U.FL-LP-IN, kubatanidza zvinobatanidza. Iyo yekubatanidza axis yezvibatanidza zvese zviri zviviri zvinofanirwa kurongeka kuitira kuti majoini agone kubatana. Iyo "tinya" inosimbisa kubatana kwakazara. Usaedza kuisa pakona yakanyanyisa.
4. Rongedza tambo yeantenna zvekuti hapana kukwira kumusoro pakati petambo neiyo u.FL yekubatanidza.
5. Kuti ubvise zvibatanidza, isa chikamu chekupedzisira cheChishandiso cheKubvisa, U.FL-LP-N-2, pasi pechikoniso chemagetsi uye wobva wasimuka, wakananga kuakisi yekubatanidza kubatanidza.

KUbatanidza iyo u.FL CABLE

• Iyo u.FL antenna inogona kunge yakabatana neDIM10-087-06 kuitira kuti iwane yakanyanya RF yekubatanidza. Iwo anokurudzirwa antenna kits ndeaya:

KIT-ANTUFL18-01

• 18” u.FL tambo ine-kurudyi-kona antenna

KIT-ANTUFL18-02

• 18” u.FL tambo ine antenna yakatwasuka

KIT-ANTUFL18-03

• 18” u.FL tambo ine kona yekurudyi stubby antenna

KIT-ANTUFL18-04

• 18” u.FL tambo ine yakatwasuka stubby antenna
• Ndokumbira utarise DIM10-087-06 pepa rekucheka kana kubata Synapse sales kuti uwane rumwe ruzivo.

KUBATA ANTENNA

1. Ita shuwa kuti simba radzimwa. Paunenge uchibata tambo yeantenna, nyanzvi inofanirwa kudzika pasi netambo yepasi.
2. Bvisa chivharo cheguruva rerabha dzvuku, washer, uye nati kubva pane chinongedzo cheantenna.
3. Sarudza yakanakisa nzvimbo yekunze antenna chinzvimbo uye gadzira yekuvhura yekuisa iyo antenna uye bulkhead (Ona Mufananidzo 6 wezviyero).
4. Dyisa iyo bulkhead kuburikidza nekuvhura mukugadzirisa. (Cherechedza: Ukobvu hwepamusoro hunokurudzirwa hwefixture wall i6mm kana 0.25 inches. Izvi zvinobvumira tambo dzakakwana kunze kwechigadziriso kuitira kubatana kwakanaka kweantenna.)
5. Isa washer uye nati kumashure pane antenna yekubatanidza uye chengetedza kugadzirisa.
6. Kara paantenna ruoko zvakasimba. Simbisa 1/4 kutendeuka nepeya yetsono mhuno pliers. Usawedzere kuomesa kana pini yeRF mumusoro inoputika, ichigadzira yakashata RF yekubatanidza mhando.

Kubatanidza maSensors

• Cherechedza: Matanho 14-18 ndeyekuwedzera masensa kune DIM10-087-06 controller; kana usiri kubatanidza masensa svetuka chikamu ichi.
• Kune maviri masensor ekuisa paDIM10-087-06 akagadzirirwa yakaderera powered (24v DC) mhando sensors.
• Iyo Input A inoshandiswa kubatanidza sensor A.
• Iyo Input B inoshandiswa kubatanidza sensor B.
• Batanidza iyo sensor simba waya kuAUX kunze kweiyo LED mutyairi (iyo LED mutyairi inopa simba sensor).
• Batanidza sensor yakajairika kune COMMON/DALI- kana COMMON/DIM- zvichibva pamutyairi we LED waunayo.
• Batanidza sensor CTRL/Kudzora waya kuInput A+ kana Input B+ yeDIM10-087-06 controller.
• Kana iwe uri kushandisa inopfuura sensor imwe, wobva wadzokorora kuisirwa sekutsanangurwa pamusoro.
• Sensors dzinofanirwa kugadzirwa musoftware dzisati dzashanda muSimplySnap system.

(Ona zvifananidzo 2 ne3)

WIRING THE DIM10-087-06 CONTROLLER

• Cherechedza: Kunze kwekunge zvataurwa, zvinongedzo kune yakajairwa Dim kune Off LED mutyairi uye DALI 2 LED mutyairi akafanana.
• Batanidza iyo 12-24VDC Aux inobuda kubva kuLED mutyairi kuenda kuDIM10-087-06.
• Batanidza iyo Aux pasi kubva kumutyairi weLED kuenda kuDIM10-087-06 (Mufananidzo 2 uye 3)

KUbatanidza DIMMING CIRCUIT

• Cherechedza: Nhanho 21-22 ndeyekubatanidza kune Standard Dim kune Off LED mutyairi; kana uri kushandisa DALI 2 LED mutyairi svetukira kumatanho 23-24.
• Batanidza iyo DIM- waya pamutyairi weLED kune DIM- yakabuda paDIM10-087-06.
• Batanidza iyo DIM+ waya pane mutyairi weLED kune DIM+ inobuda paDIM10-087-06. (Ona Mufananidzo 2)
• Cherechedza: Matanho 23-24 ndeyekubatanidza kune DALI 2 LED mutyairi.
• Batanidza iyo DALI- kubva paDIM10-087-06 kuenda kuDALI-/COMMON waya pamutyairi weLED.
• Batanidza iyo DALI+ kubva kuDIM10-087-06 kuenda kumutyairi weLED DALI+. (Ona Mufananidzo 3)

KUSIMBISA CHIKAMU NEMUTONGI

• Mushure mekubatanidza Controller kuDhivhari ye LED uye chero masensa, ita shuwa yekuvharisa chero waya dzisina kushandiswa. Chinja simba kune chigadziriso. Chiedza chinofanira kubatidzwa.
• Cherechedza: Kana yabatidzwa, lamps inofanira kubatika pakupenya kuzere neinenge gumi VDC chiratidzo paDIM+ waya uchishandisa DIM- waya sereferensi.

STATUS akatungamirira

• Cherechedza: Kana mutongi achiiswa simba mavara anotevera anoratidza mamiriro azvino.
• Tsvuku = Hapana Network Yakawanikwa (Kukurukurirana Yakarasika)
• Kubwaira kweGreen = Network Yakawanikwa, Controller Haina Kugadziriswa (Chishandiso hachisati chawedzerwa kune SimplySnap)
• Girinhi = Network Yakawanikwa, Mudzori Akagadziriswa (Kazhinji Kushanda)
• CHERECHEDZA: Tarisa kune SimplySnap Mushandisi's Manual kuti uwane ruzivo rwekupa iyo DIM10-087-06.

FCC

REGULATORY INFORMATION AND CERTIFICATIONS

• RF Exposure Statement: Mudziyo uyu unoenderana neFCC radiation exposure limits yakatemerwa nharaunda isingadzoreki. Mudziyo uyu unofanirwa kuiswa uye kushandiswa nedikidiki chinhambwe che20cm pakati pe radiator nemuviri wako.
• Iyi transmitter haifanirwe kunge yakabatana kana kushanda pamwe chete nechero imwe antenna kana transmitter.
• Industry Canada (IC) zvitupa: Ichi chidzitiro chedhijitari hachipfuure miganho yeKirasi B yekuburitsa ruzha rweredhiyo kubva mumidziyo yedhijitari yakarongwa muRadio Interference Regulations yeCanada Dhipatimendi Rezvekutaurirana.
• FCC certification uye ruzivo rwekutonga (USA chete)
• FCC Chikamu 15 Kirasi B: Ichi chishandiso chinoenderana nechikamu 15 chemitemo yeFCC. Kushanda kunoenderana nemamiriro maviri anotevera:

1. Iyi michina inogona kusakonzera kukanganisa kunokuvadza, uye
2. Midziyo iyi inofanirwa kugamuchira chero kuvhiringwa kwakagamuchirwa, kusanganisira kukanganisa kunogona kukonzera kukuvadza kushanda.

KUPINDISA RADIO FREQUENCY (RFI) (FCC 15.105): Midziyo iyi yakaedzwa uye yakawanikwa inoenderana nemiganhu yeKirasi B yedhijitari mudziyo, zvichienderana neChikamu 15 chemitemo yeFCC. Iyi miganho yakagadzirirwa kupa dziviriro inonzwisisika kubva mukukanganisa kunokuvadza mukuiswa kwekugara. Midziyo iyi inogadzira, inoshandisa, uye inogona kuvheneka redhiyo frequency simba uye, kana isina kuiswa uye kushandiswa zvinoenderana nemirairo, inogona kukonzera kukanganisa kunokanganisa kufambiswa kweredhiyo. Nekudaro, hapana vimbiso yekuti kukanganisa hakuzoitika mune imwe yekumisikidza. Kana mudziyo uyu ukakonzera kukanganisa kunokuvadza redhiyo kana terevhizheni, iyo inogona kutariswa nekudzima uye nekubatidza mudziyo, mushandisi anokurudzirwa kuyedza kugadzirisa kukanganiswa neimwe kana anopfuura eanotevera matanho:

1. Dzokorora kana kutamisa antenna yekugamuchira;
2. Wedzera kupatsanurwa pakati pemidziyo nemugamuchiri;
3. Batanidza midziyo mune yekubuda padunhu rakasiyana neiyo iyo mugamuchiri akabatana;
4. Bvunza mutengesi kana nyanzvi yeredhiyo/TV ine ruzivo kuti ubatsirwe.

Declaration of Conformity (FCC 96-208 & 95-19): Synapse Wireless, Inc. inozivisa kuti zita rechigadzirwa “DIM10-087-06” rine sungano nechiziviso ichi, rinosangana nezvinodiwa zvakataurwa neFederal Communications Commission sezvakatsanangurwa mune zvinotevera:

• Chikamu 15, Chikamu B, cheKirasi B michina
• FCC 96-208 sezvainoshanda kumakomputa emunhu eKirasi B uye maperipheral
• Ichi chigadzirwa chakaedzwa kuExternal Test Laboratory yakasimbiswa maererano nemitemo yeFCC uye yakawanikwa ichisangana neFCC, Chikamu 15, Emission Limits. Documentation is on file uye inowanikwa kubva kuSynapse Wireless, Inc.
• Kana iyo FCC ID yemodule mukati meichi chivharo chakavharika isingaonekwe kana yaiswa mukati meimwe mudziyo, ipapo kunze kwemudziyo wakaisirwa chigadzirwa ichi kunofanirwawo kuratidza label inoreva kune yakavharirwa module FCC ID.
• Shanduko (FCC 15.21): Shanduko kana gadziridzo kumudziyo uyu usina kutenderwa zvakajeka neSynapse Wireless, Inc., zvinogona kukanganisa masimba emushandisi ekushandisa mudziyo uyu.

ZVIMBO

• Muenzaniso: DIM10-087-06
• Iine FCC ID: U9O-SM220
• Ine IC: 7084A-SM220
• UL File Nhamba: E346690
• DALI-2 Certified Application Controller CE UKCA
• Bata Synapse yeRutsigiro- 877-982-7888
• Patented - chaiyo yekumaka pa https://www.synapsewireless.com/about/patents
• DIM10-087-06 Mutongi
• Load Ratings: 12 kusvika 24VDC, +/- 10%, 700mW max
• Kushanda Humidity: 10 kusvika 90%, isina-condensing

Zvinyorwa / Zvishandiso

synapse DIM10-087-06 Embedded Controller [pdf] Bhuku reMirayiridzo 21-D08706-INS A-5, DIM10-087-06, DIM10-087-06 Embedded Controller, Embedded Controller, Controller

References

• User Manual